There are two categories:
One is rubber material: one-piece vulcanization molding process, seamless and interface-free, the raw material is made of high-quality neoprene, with rubber content of up to 90%, and does not contain recycled glue, wear-resistant and non-slip, this quality is also guaranteed!
The other is the film base material: black film base with high strength, low elongation and good bending resistance is used as a solid layer in the middle of the double-sided blue rubber, and the High-strength base material is used as a solid layer in the middle of the double-sided blue rubber. a high temperature hot melt splicing process is used. The joints are firm, flat, not easy to tear, have good toughness, the belt body is soft, and the surface has a specific pattern. The paper is carried to provide friction. be producedit from 3mm to 6mm, and the length can be customized according to personal requirements!
Yes.
1. The vacuum belt can provide stable support: the line scan camera should scan on a stable plane to avoid shaking or movement that affects the scanning effect. The suction belt can be fixed on the surface of the scanning platform to fix the camera in place by suction, thereby providing stable support, thereby improving the accuracy and effect of scanning.
2. The vacuum belt can reduce the vibration and interference generated by the camera during the scanning process: the line scan camera will be affected by various factors during the scanning process, such as the texture of the scanning surface. and vibration of the camera itself, etc., resulting in deviation or distortion in the scanning results of the camerara. The vacuum belt can reduce the friction between the camera and the scanning surface, absorb the vibration and interference generated by the camera, reduce the influence of these factors, and improve the accuracy and effect of scanning.