First loosen the generator fixing screw and belt tightness adjustment screw of Landwind X7, then push the generator against the engine to minimize the distance between the pulleys, then put on the belt and straighten it . Finally, adjust the belt tightness to the appropriate level and tighten the motor mounting screws and adjusting screws.
The timing belt is a belt used in the engine valve system. The timing belt is connected to the crankshaft and matched with a certain transmission ratio to ensure the accuracy of intake and exhaust timings. Belts are used instead of gears for transmission because they are less noisy, have less variability, and are easier to compensate for. Obviously, the lifespan of the belt should be shorter than that of metal gears, so it must be replaced regularly.
The function of the beltdistribution is to connect the upper and lower parts. The upper part is connected to the timing wheel of the engine cylinder head, and the lower part is connected. to the crankshaft timing wheel. The timing wheel is connected to the camshaft, there is a cam on this camshaft, and its contact point is the small rocker arm. The rocker arm generates pressure thanks to the power provided by the timing belt, which plays a lifting role. role.
(Photo/Text/Photo: Li Xiongwei) @2019
The Landwind X7 generator has two belts.
One is the generator belt and the other is the timing belt.
The replacement cycle also varies between different models. Usually, the engine belt replacement cycle is about 50,000 kilometers, and the few that need to be replaced exceed 100,000 kilometers.
However, the specific time dependsnd of the calibration cycle for each vehicle model.