If you don't want to buy it, don't buy it. From an environmental point of view, the magnetic field of power plants will cause great interference to the human body, and the odor emitted from the chimney is also harmful to human health. According to Feng Shui, both are evil spirits and evil spirits are very powerful. Even if plants are placed, a large amount of water and metal will be dissolved together. If they are too close, the plant power alone won't. to be enough.
Power plant chimneys
The number, type, height and smoke outlet rate of chimneys shall be based on the requirements of environmental protection and anti-corrosion of chimneys, the number of boilers being built at the same time, the arrangement of chimneys and the structural conditions are determined on the basis of overall considerations such as economic rationality.
The height of the chimney and the upper outlet diameter should be selected according to the following series:
Height of the reinforced concrete chimney (m): 80, 100, 120, 150, 180, 210, 240, 270, 300.
When the diameter of the upper outlet is less than 8m, the module can be 0.5m; when it is equal to or greater than 8 m, the module can measure 1 m.
It is not that the higher it is, the better, the higher the cost, the more requirements for the fan are high. The larger the unit, the taller it is. Sometimes the chimneys of the 30W unit and the 600,000 unit have the same height.
The 13.5W model of our power station is tall and thin, and the 33W model is short and thick
Heating furnace chimney
According to the different internal structures of the boilers of each manufacturer, the size of the chimney heights are also different, and this is also related to the size of the boilerFinally, I would like to ask the manufacturer from whom you purchased the boiler. The manufacturer knows it. his product is the best. Our boiler is forced draft, so the chimney only needs to go out of the room. No matter how it is installed, it can be installed in the house and then installed down. on the internal structure of the product. Many chimneys have to be removed directly for the fire, so if it is a boiler of around 0.1 MW it is usually around 6 meters high. I hope this will help you.
! I don't know what you're asking about.