The production process of the protective cover of the guide rail member of the machine tool:
The production process of the protective cover of the guide rail member of the machine tool PVC machine tool is to first calculate the drawing, and then cut the fabric according to the drawn size. by the technical service. Once the fabric is cut, it is punched. After making the pattern, connect the cut PVC and fabric together for heat sealing, stick the connection plates on both ends. Finally, check if the quality and data are qualified. If they are qualified, they can be printed.
There is also a protective cover made from Highland barley paper. This kind of protective cover can only be dustproof, but not waterproof and oilproof. Some customers only need this type of dust-proof equipment. PVC heat seal. , and the price is still cheap. This requireste that the technical department first calculates the designs, then cuts the highland barley paper and cloth, and then uses special organ shield glue to stick them together. is folded manually, then pressed after folding. After a day of extrusion and shaping, the connection plates are glued. Finally, the quality and data are checked to see if they are qualified. qualified, they can be packed and shipped.
Organ protection cover products have the characteristics of tight structure, reasonable structure, no noise, large stroke, rapid movement and a long lifespan. It is widely used in ordinary machine tools, CNC machine tools, hydraulic machines and other equipment. The operating environment of our organ protection cover equipment can be made into steel support frame, wooden frame, e-framen PVC, cold plate frame organ protection, etc. According to the operating environment of the equipment, the internal structure of the organ guard includes grooves, rollers, nylon sliders, sliders, tie bars, tension springs and nylon shafts . The shapes of organ protective covers are divided into straight, 7-shaped, U-shaped, square and round shapes.
What are the structure and advantages of mechanical protection covers?
Tibet Self-Guided Tour Guide: Prepare heavy clothing, prevent altitude sickness, bring sunscreen, and plan a good route.
1. Tibet has a large temperature difference between day and night, with the average annual temperature ranging from -2.4°C to 12.1°C, decreasing from southeast to northwest. is highest in June or July and lowest in January, the temperature range ofDaytime temperature in most areas is above 15°C, which is higher in winter and lower in summer. It is recommended to bring some clothes.
2. It is actually very convenient to withdraw money in Tibet, but it is recommended to use postal savings, which is the most convenient bank, such as China Construction Bank, Agricultural Bank of China and Bank. of China also have them, but some small places do not have them. Banks in some counties are often closed, but they usually have ATMs. Others, like Everbright and Transportation, are not available in Tibet.
3. Tibet has very strong ultraviolet rays, so it should not be taken lightly, especially Lhasa, which has a high altitude and is a "sunny city". as well as sunglasses and a parasol. It is best to wear a hat, otherwise your skin may not tolerate it and youreyes might be uncomfortable at the end of the day.
4. There are many good places in Tibet. You can take a look at the places that interest you and plan your route yourself. For example, the Potala Palace (3 hours)? → ? Zongjiao Lukang Park (1 hour) → Jokhang Temple (1h30) → Barkhor Street (2 hours).
Detailed information:
1. The air in Tibet is thin, with low atmospheric pressure and low oxygen content. The average density of air is 60-70% of air density. at sea level. Plateau air Oxygen content is 35-40% lower than at sea level. Solar radiation is strong and daylight hours are long. When you go to Tibet, you should pay attention to your words and deeds, pay attention to ethnic unity, and respect the statues of Buddhhas. You cannot touch them with your hands. Also, you can't touch the heads of Tibetans. A taboo.
2. When you go to Tibet, you can stay in family hotels and the like, which have a Tibetan flavor, are not expensive and are very comfortable. There is no need to worry about personal safety. Tibet is very safe and there are many armed police patrolling the streets.
Mechanical protective cover is a kind of protective equipment, which is divided into steel plate protective cover, organ type protective cover (material cloth). nylon + PVC plate support) and rubber protective cover. in terms of hardware.
1. Good temperature resistance and thermal insulation effect.
The raw materials selected for the mechanical protective cover have high temperature resistance, heat insulation and other properties, which can effectively protectcements machines and equipment against damage in high temperature environments
2; .Dustproof, waterproof and anti-static.
The protective cover can isolate the contact between the machine and the working environment, prevent dust, water mist, etc. generated during operation to enter the machine and reduce its duration of use;
3. Improve the environment and image.
The use of mechanical protective covers can evenly regulate the machines and equipment in the workshop, change the dirty and messy environment of the past, and improve the overall image of the workshop.