1. First, remove the ring rope near the end of the tent wind rope slider, as shown in the picture below:
2. Then use it to cover the floor nails. as shown in the image below. Display:
3. Then select the position of the floor nails according to the ground conditions. Generally speaking, the smaller the angle between the wind rope and the ground, the better. Wind resistance of the tent. Place the ground nails at a 45 to 60 degree angle. Insert them into the ground so that the force is greatest, as shown in the figure below:
4. the tightness of the wind rope, as shown in the figure below:
5. Release your hands if the whole tent rope is still very tight, it means the windproof rope is installed, as shown in the figure. photo below:
How to fix the windproof rope of an outdoor tent?
Hardware stores sell windproof ropes. Windproof cords can be purchased at hardware stores. Wind rope is a rope used for securing canvases, plastic sheets or other materials. It is commonly used in outdoor activities, tent construction, gardening work and other occasions. It is generally made of durable materials such as nylon, polyester fiber, etc., and has good windproof performance and load capacity
Depending on the shape of the selected tent, a One end of the windproof rope is usually tied to the tent, and the other end is tied to the tent. Nail it into the ground with ground nails and tighten it in four directions to prevent the tent from being blown away by the wind. At the same time, use floor nails to secure the four corners to the ground. Some floor nails are not easy to insert and need to be knockedes with something. This can easily damage the floor nails. easy place to insert.