1. Crafting a Kinetic Power Generator requires 6 Iron Cases, 1 Iron Handle, an Electric Motor, and a Thermal Generator
2. The height is usually limited to 120 to 160. and 120 is exactly the height of the clouds. You can go up. It is best to avoid clouds, otherwise it will obstruct the view. How to check which layer the player is on in the game? Press the F3 key on the keyboard. There will be XYZ in the upper left position. The colon Y is followed by the height, i.e. which layer the player is on.
3. Go to the 140th floor to build a generator. At this point you need to prepare a lot of stepping stones or scaffolding. Second, you also need a lot of wire, otherwise you won't be. be able to use the electricity produced by the wind turbine. After reaching the 140th floor, you need to build 3 grids outward in any direction to place the generalwind kinetic energy generator and kinetic energy generator.
4. When placing these two machines, the black holes of both machines must face the same direction. The wind kinetic energy generator black hole should face outward and the kinetic energy black hole. The generator also has to deal with kinetic energy.
5. When placing, place the Wind Kinetic Power Generator first. After placing it, stand on the wind kinetic energy generator. Press and hold the stealth button before placing the kinetic energy generator. , right-click on any machine. This will tell you that the rotor is missing.
6. At this point you should understand that rotors of four different materials, wood rotors, iron rotors, refined iron rotors, and carbon rotors, have different maximum acceptable speeds. is beyondIf the speed is increased, the rotor will be damaged more quickly. Carbon rotors are used here.
7. Install the carbon rotor and you will see that the kinetic energy generator produces considerable power.
Wind power generates approximately 1.4 kilowatt hours of electricity per cycle.
Take the example of a 1,500 kilowatt wind turbine. The unit's blades are approximately 35 meters long (approximately 12 stories high). Each rotation of the wind turbine takes about 4-5 seconds (but the peak speed of the blades at this time can reach more than 280 kilometers per hour, comparable to the speed of a high-speed train) and can generate about 1, 4 kilowatt hours of electricity. . Under normal full power conditions, one day's electricity generation can be used by 15 families for a year.
Generally speaking, Category 3 winds are valuable for use. However, from a pointFrom an economic and reasonable point of view, wind speeds above 4 meters per second are suitable for electricity generation. According to measurements, a 55 kilowatt wind turbine has an output power of 55 kilowatts when the wind speed is 9.5 meters per second; when the wind speed is 8 meters per second, the power is 38 kilowatts when the wind speed is 6 meters; per second, the output power of the unit is only 55 kilowatts, which is 16 kilowatts and when the wind speed is 5 meters per second, it is only 9.5 kilowatts.
The principle of wind energy production :
The principle is to convert the kinetic energy of the wind into mechanical kinetic energy, then convert mechanical energy to For electrical kinetic energy, it is wind energy. The principle of wind power generation is to use wind energy to turnner the blades of the wind turbine, then use a speed multiplier to increase the rotation speed to produce electricity.The machine produces electricity.
According to wind turbine technology, electricity production can start at a breeze speed of around three meters per second (the degree of breeze). Wind energy is becoming a craze worldwide because it does not require the use of fuel and does not produce radiation or air pollution.
The devices needed to produce wind energy are called wind turbines. This type of wind turbine can be roughly divided into three parts: the wind wheel (including the tail rudder), the generator, and the tower.
The wind wheel is an important element that converts the kinetic energy of the wind into mechanical energy. It is made up of several blades. When the wind blows towards the blades, an aerodynamic force is generated on the blades.blades to turn the wind wheel. The blade material requires high strength and light weight and is often made of fiberglass or other composite materials (such as carbon fiber).
The iron tower is the structure that supports the wind wheel, rudder and generator. It is usually built relatively high in order to obtain a greater and more uniform wind force and to have sufficient force. The height of the tower depends on the impact of ground obstacles on wind speed and the diameter of the wind wheel. It is generally between 6 and 20 meters.
The function of the generator is to transfer the constant rotation speed obtained from the wind wheel to the power generation mechanism through increased speed for uniform operation, thereby converting mechanical energy into electrical energy .
Reference for the above content: Baidu Encyclopedia - Wind Powerdon't