Remove the two fixing screws 1 to remove the brush assembly, loosen the nuts 2 and lock nuts, and the brush assembly 3 can be removed from the bolts;
Unscrew the three housing bolts. 4, and the front end cover with rotor will be separated from the rear end cover with silicon stator and rectifier assembly
Remove the tape spool fixing nut, then remove tape coil, fan and semicircular; wrench on the rotor shaft and remove the rotor?
Remove the Yu bearing cover and remove the front bearing?
Remove the combined silicon rectifier component on the rear cover ; Protective cover 5, remove the three stator coil seals fixed on the silicon rectifier assembly;
Attach the screws and nuts to separate the stator from the silicon rectifier assembly components?
Remove Attach the nut from the combined rectifier component to the ssilicon and the nut of the output end on the lower rear cover, and the combined component of the silicon rectifier can be removed; ?
Follow the steps above to remove the Generator. When installing the alternator, proceed in reverse order, being careful that the brush assembly is installed last.
Generators are mechanical devices that convert other forms of energy into electrical energy. They are driven by water turbines, steam turbines, diesel engines or other electrical machines to convert water flow, air flow. , fuel combustion or atomic nuclei The energy produced by fission is converted into mechanical energy and transmitted to the generator, which is then converted into electrical energy. Generators are widely used in industrial and agricultural production, national defense, science and technologyand daily life.
Generators come in many forms, but their operating principles are all based on the law of electromagnetic induction and the law of electromagnetic force. Therefore, the general principle of its construction is: using suitable magnetic and conductive materials to form magnetic circuits and circuits that conduct electromagnetic induction among themselves to generate electromagnetic energy and achieve the conversion goal of energy.