Method/steps:
1
Chassis installation, take out the elbow screw and pressure plate from the column, insert the column into the base, place the pressure plate on the lower part of the chassis, and use the bend Tighten the head locking screw clockwise.
2
Adjust the telescopic rod. To adjust the telescopic rod, first loosen the lift lock nut, pull the lift pipe out of the column, and lock it with the lift lock nut.
3
Adjust the fuselage. Unscrew the clamp nut on the lower part of the fuselage, insert the fuselage into the lift tube, tighten the clamp nut, and loosen the lift lock nut. Adjust to desired height and tighten nut.
4
Install the rear grille, unscrew the blade fixing nut from the click shaft and then unscrew the triangular nut, align the corresponding holes to install the rear grille, and tighten the grille nut.
5
Install the fan blade. The groove behind the fan blade is stuck on the limit pin of the motor. Tighten the fan blade nut counterclockwise.
6
Install the front grille, install the front grille and fasten it, and a floor-standing electric fan is assembled.