Do window wells on the basement floor count as building area?
Do they count as underground area
Do window wells in the basement count as building area?
Window wells do not count as building area. .
How to determine the size of the blinds after the exhaust shaft emerges from the ground in architectural design?
In architectural design, the size of the blinds after the exhaust shaft emerges from the ground is determined based on the air volume, wind speed and shading rate of the blinds.
The calculation formula of the louver area is as follows:
Selection of air supply section: air volume / design wind speed * system loss coefficient (>1)
Air duct size = air volume/wind speed Air volume = room area %, when the air is supplied and exhausted naturally, it can be calculated based on the wind speed of 0.5-1M/S.
Question: If a glass skylight is built above the patio of a building, if it is used as a skylight in the energy saving calculation, it will be greater than 4% of the roof area. Should it be used as a skylight in the energy saving calculation?
Yes...Model The second skylight must be set up, otherwise it will not pass the drawing review. Energy saving means that the transparent area of the roof should not be greater than 20% of the total area of the roof...
In the HVAC industry, regulations require that the distance between the smoke exhaust machine room and the air supply machine room should be no less than what? < /p>
There are no direct requirements for the distance between the computer rooms, but it should be noted that when the outdoor smoke exhaust vents and the air inlets of the supplemental air system are arranged horizontally, the horizontal distance should not be less than 10 meters. When they are arranged vertically, the exhaust vents must be The smoke outlet is at the top, and the height difference should not be less than 3 meters. Therefore, this factor should be considered when arranging the computer room.