Because the hot air blown out by the hair dryer is generated by heating the front-end heating wire, if the heating time is too long, the plastic material on the front end of the hair dryer may be burned, so it is normal to have a burning smell. Especially the hair dryer you just bought will have a burning smell. So when using a hair dryer, do not use it for a long time.
The heavier the hair dryer, the better the quality. The wall is thick, strong, heat-resistant, and double-insulated. Some have ion generators inside, which can emit ionized wind to make hair smooth. The ionized wind can also sterilize. ability.
However, no matter what kind of hair dryer it is, it must not be used in the bathroom. There is a great risk of electric shock in a humid environment after bathing.
Extended information:
1. Pay attention to the power number. The higher the power, the higher the temperature and speed of the hair dryer. It's that simple. Low-power hair dryers use high temperatures to bake the hair, evaporating the moisture in the hair and making the hair drier.
2. Blow the hair roots first. Blow dry the roots first and then the ends, or let the ends air dry to minimize the damage caused by a hair dryer.
3. The direction of blowing. If you want to achieve silky smooth hair, remember to blow the hair dryer in the direction of the hair cuticles. The direction in which the hair scales grow and close is towards the ends of the hair, that is, the hair dryer should blow the hair from top to bottom. Back blowing will cause the hair scales to open and the hair will feel rough to the touch.
4. Different air nozzles are suitable for different hairstyles. Generally, hair dryers are equipped with two types of air nozzles. A flat-head air nozzle can blow out smooth long straight hair, and can be used with a roller comb to blow out soft waves; another round air diffuser is suitable for blowing permed curly hair, which can maintain the curls and curls. Fluffiness.
References:
The properties and characteristics of the metal pattern are as follows:
1. Use wedge-shaped pressure-bearing pads to adapt to the different inclination angles of each stay cable. .
2. Built-in dampers can be used for cable-stayed shock absorption, and the dampers can be ensured to be firmly connected to the main beam, so that the dampers can fully play their role.
3. There are no special requirements for structural materials. Generally, steel can be used for bridges.
4. The cable anchor head is placed in the wind nozzle, which has a good landscape effect, but it is inconvenient to inspect and maintain.