I'm sorry that I just saw your problem. I solved it myself. I have some knowledge about automotive electrical appliances. Because the original generator was too expensive and I was reluctant to replace it with a new one, I dismantled and opened the generator myself. I found that one set of solder joints of the internal rectifier diode was desoldered and seemed to be connected but not connected. I soldered it myself and the problem was solved. I am using it now.
Is the generator belt of the 17 JAC Refeng S3 generator the same as the air conditioner belt?
For the output voltage of the new JAC Refeng S7 generator is only 10 volts, there may be the following reasons:
p>
1. Faulty circuit: There may be a fault in the circuit inside the generator, causing the output voltage to decrease. It may be caused by loose circuit connections, disconnected lines, or damaged circuit components.
2. Power adjustment problem: There may be a problem with the power adjustment device of the generator and it cannot adjust the output voltage normally, resulting in a low output voltage.
3. Power supply problem: The power supply of the generator may be unstable, such as insufficient power voltage or poor power line contact, which will cause the output voltage to decrease.
Further inspection and repair are required to determine the specific cause and make appropriate repairs. When repairing problems with generator output voltage, ensure safe operation to avoid dangers such as electric shock.
In addition, generators, as an important power equipment, are widely used in industry, agriculture, construction and other fields. Understanding the basic principles and working methods of generators, as well as common troubleshooting methods, is of great significance for maintaining and maintaining generators. At the same time, correct use and regular maintenance of the generator can extend its service life and improve work efficiency.
The generator belt and air conditioner belt are not the same on the 17 JAC Ruifeng S3. The generator belt is used to drive the generator to generate electricity, while the air-conditioning belt is used to drive the air-conditioning compressor. They have obvious differences in function and use.
Alternator belts are usually longer and wider than air conditioner belts because the generator needs to produce more power. In addition, the generator belt is usually connected to the engine's crankshaft wheel so that the rotation of the engine drives the generator. The air conditioning belt is usually connected to the air conditioning compressor to drive the air conditioning system through the rotation of the engine.
It should be noted that different models and different engine configurations may vary. Therefore, in specific cases, it is recommended to consult the vehicle's manual or consult a professional car repair technician to ensure that you choose the correct one. belt. In addition, regular inspection and replacement of belts are also important steps to maintain the normal operation of the vehicle and avoid failures caused by belt aging or damage.
Extended content: In addition to generators and air conditioning systems, modern cars usually have other drive systems, such as water pump drive belts, power steering pump drive belts, etc. Each drive system has its own specific belts to ensure proper operation of each component. Therefore, when purchasing and replacing belts, choose based on specific drive system needs, and perform regular maintenance and replacement to ensure vehicle reliabilityand security.