Method for adjusting the belt of a single-cylinder diesel engine that is too tight:
The base of the diesel engine is equipped with a chute-type chute, the purpose is to adjust the distance between the engine diesel engine and the "belt pulley" at the other end.
First loosen the fixing screws at the four corners of the diesel engine base, and push the diesel engine along the chute to the belt pulley at the other end. Be careful not to push too much, otherwise the belt will break. will be too loose.
The best way is: try to use a belt while pushing, hook the belt to the "belt pulley" on the other end, then pull it to the "belt pulley " of the diesel engine. is pulled The belt can be hung 1.5 cm ~~ 2 cm from the edge of the "belt pulley" of the diesel engine, and that's it.
Then attach the screws to the four corners of the diesel engine and install the belt correctly.