Not universal.
The number of gear teeth in the 182 and 130 gearboxes is different. There are 16-tooth, 18-tooth, and 24-tooth rear axle gearboxes. Different brands of cars have different screw holes on the rear axle.
Gearboxes have a wide range of applications, such as in wind turbines. Gearboxes are an important mechanical component widely used in wind turbines. Its main function is to transmit the power generated by the wind wheel under the action of wind to the generator and obtain the corresponding rotation speed.
How long will it take for the gearbox to break down if it is not refueled?
The bearing failure rate at the high-speed end is higher because the alignment of the high-speed end is not good. Some measures have been taken to improve the current gearbox. It has improved a bit, but the bearing failure is still high. Bearing failures at the low speed end have also been very high for some time in the past. Bearing failures result in tooth surface failures, mainly planetary wheel bearing failures. Gear failure is more likely to be caused by micropitting corrosion.
5 to 10 days. When the gearbox is working, the rotation speed and friction between the gears are high. If the gearbox is not refueled, it will cause abnormal wear of the gears or even burn the gears. The gearbox will be completely scrapped in 5 to 10 days. The gearbox is an important mechanical component widely used in wind turbines.