Hello, the following information is for your reference. The size of the wind power base base mold is mostly 10m~20m, and the depth is mostly 2m~3m. Due to its large size, it is mostly made of multiple steel plates, so that it can be easily transported during transportation. And the steel plate can be disassembled into sheets during storage, which is convenient for transportation and saves space. Wind power base base molds are usually both round and square. In order to meet engineering needs, they can usually be customized and produced. Customers can choose a suitable model or directly provide mold drawings to the factory. The factory will strictly follow the drawings provided by the customer. The wind power foundation that guarantees output can fully meet the needs of power generation projects. This type of mold is mostly produced by cast-in-place production. It is installed as a base in the dug foundation for pouring, and plays the role of fixing the wind power generation equipment above. This can make the produced wind power foundation base more closely. Connect with the ground to achieve sufficient fixation effect. The wind power foundation base mold is a little different from most on-site cast molds in use. The main reason is that in order to ensure the strength of the foundation base, it is often necessary to tie the cap steel bars first and then assemble the mold inside and outside the steel bars. Therefore, it is usually necessary to tie them well. The steel bars are then spliced piece by piece with the molds painted with release agent. Otherwise, if the molds are spliced and then sprayed with release agent, it will easily stick to the steel bars, causing the steel bars to be loosely connected to the concrete.
Dimensional standards around wind power tower base construction
Introduction Hello, the size standards around the base construction of wind power towers. The following information is for your reference. The size of wind power base base molds is mostly 10m~20m, and the depth is mostly 2m~3m.