The cigarette lighter fuse of Ruifeng M3 (check transaction price | model details) is in the fuse box next to the engine. The fuse is an electrical component that protects the circuit. When the current abnormally rises to a certain height and heat, it will melt and cut off the current, thereby protecting the safe operation of the circuit.
The cigarette lighter in the car draws direct current from the car's generator. As long as the car's engine is running, it drives the generator to generate electricity, and all the electricity used in the car comes from this. If you need to use the cigarette lighter for a long time, or the device has a high power, you need to start the car engine to increase the power, so as not to consume the car battery power.
The car cigarette lighter should be prevented from being stuffed with foreign objects to avoid damaging the car cigarette lighter. If the vehicle has a cigarette lighter protective cover, cover it in time. The correct way to use a cigarette lighter is to insert and pull it out vertically. Do not pull it out while shaking. Frequent shaking can easily cause the cigarette lighter fuse to loosen and short-circuit, and it is easy to burn the fuse and external devices. Since you need to touch the heating wire when lighting a cigarette, be careful not to press the heating wire too hard. If tobacco or other objects fall into the heating wire, clean it up in time to extend the service life of the cigarette lighter. (Pictures/Text/Photography: Li Linwei) @2019
It’s all because of this engine.
If there is jitter or the problem is caused by your generator or the generator's foot pads not being installed properly, you can reinstall it. To do this, buy an original bracket and install it. Generally speaking, if the sub-factory brand is used, it will easily cause this breakage and vibration breakage. ”
If you have replaced the original one and still have this damage, then you need to check whether the engine is shaking more severely. You need to replace the engine, gearbox, and foot pads. No. It is ruled out that engine vibration caused the bracket to break.