Iron core, winding, oil tank, insulating sleeve, machine base
It is composed of rotor, end cover, bearing and other components.
The stator consists of the stator core, wire windings, machine base and other structural parts that fix these parts.
The rotor is composed of rotor core (or magnetic pole, magnetic yoke) winding, retaining ring, center ring, slip ring, fan and rotating shaft.
Yes.
Steps:
1. Use high-strength magnets or magnets with excitation coils to make a new rotor, add a gearbox, and increase the fan blades to determine the output frequency. Too high.
2. Rectify the DC power with a bridge, input it into the battery, then connect it to the inverter, and invert it into a single 220v AC power. Of course, if there is no inverter, you can use rc oscillation to drive the thyristor and then enter the transformer to boost the voltage. .
3. The stator and rotor of the generator are connected and assembled by the bearings and end covers, so that the rotor can rotate in the stator and perform the motion of cutting the magnetic lines of force, thereby generating an induced electric potential, which is led out through the terminals and connected. In the loop, current is generated.
Generators (English name: Generators) are mechanical devices that convert other forms of energy into electrical energy. They are driven by water turbines, steam turbines, diesel engines or other power machinery to convert water flow, air flow, fuel combustion or atomic nuclei. The energy produced by fission is converted into mechanical energy and passed to the generator, which is then converted into electrical energy. Generators are widely used in industrial and agricultural production, national defense, science and technology and daily life.
Generators come in many forms, but their working principles are all based on the law of electromagnetic induction and the law of electromagnetic force. Therefore, the general principle of its construction is: use appropriate magnetic and electrically conductive materials to form magnetic circuits and circuits that conduct electromagnetic induction with each other to generate electromagnetic power and achieve the purpose of energy conversion.
Generators are usually composed of stators, rotors, end covers, bearings and other components.
The stator consists of the stator core, wire windings, machine base and other structural parts that fix these parts.
The rotor is composed of rotor core (or magnetic pole, magnetic yoke) winding, retaining ring, center ring, slip ring, fan and rotating shaft.