Crankshaft pulley, water pump pulley, generator pulley and compressor pulley.
1. Crankshaft pulley: The power source is locked, and the rotation of the belt is provided by this pulley.
2. Water pump pulley: realizes cooling water circulation inside the engine through rotation.
3. Generator pulley: rotates the generator to provide supplementary power to the vehicle.
4. Compressor pulley: The compressor works through rotation, providing low-temperature refrigerant to the air conditioner and reducing the temperature inside the car.
Is the generator belt of the 17 JAC Refeng S3 the same as the air conditioner belt?
Yes.
The Ruifeng 2.0vvt generator has a buffer to prevent large current from impacting the battery.
Generators with buffers are better than those without buffers. With buffers, when the generator speed is too high, the output voltage is too high, the regulator will act, reduce the excitation voltage, and reduce the output voltage to avoid Large current impacts the battery.
Installation method of alternator belt on Refine S2
The alternator belt and air conditioning belt are not the same on the 17 JAC Refeng S3. The generator belt is used to drive the generator to generate electricity, while the air-conditioning belt is used to drive the air-conditioning compressor. They have obvious differences in function and use.
Alternator belts are usually longer and wider than air conditioner belts because the generator needs to produce more power. In addition, the generator belt is usually connected to the engine's crankshaft wheel so that the rotation of the engine drives the generator. The air conditioning belt is usually connected to the air conditioning compressor to drive the air conditioning system through the rotation of the engine.
It should be noted that different models and different engine configurations may vary. Therefore, in specific cases, it is recommended to consult the vehicle's manual or consult a professional car repair technician to ensure that you choose the correct one. belt. In addition, regular inspection and replacement of belts are also important steps to maintain the normal operation of the vehicle and avoid failures caused by belt aging or damage.
Extended content: In addition to generators and air conditioning systems, modern cars usually have other drive systems, such as water pump drive belts, power steering pump drive belts, etc. Each drive system has its own specific belts to ensure proper operation of each component. Therefore, when purchasing and replacing belts, choose according to specific drive system needs, and perform regular maintenance and replacement to ensure vehicle reliability and safety.
1. First loosen the generator fixing screw and the belt tightness adjusting screw.
2. Secondly, place the generator of Ruifeng 2 against the engine so that the distance between the pulleys is the shortest, and then place the belt sleeve on the rocking hammer.
3. Finally, adjust the belt tightness to the appropriate level, tighten the engine fixing screws, and adjust the screws.