One ton of grouting material is about 0.5 cubic meters. Usually the cement-based grouting material is 2.2 tons per cubic meter.
High-strength non-shrinkage grouting material is a relatively fine name for grouting material, usually referred to as grouting material.
Extended information:
Characteristics of high-strength non-shrinkage grouting materials
1. Early strength and high strength : The compressive strength can reach more than 30-50Mpa in 1-3 days.
2. High self-flowing property: it can fill all the gaps and meet the requirements of secondary grouting of the equipment.
3. Micro-expansion: ensure close contact between the equipment and the foundation, and there will be no shrinkage after secondary grouting. The bonding strength is high, and the holding force with steel bars is not less than 6Mpa.
4. Winter construction is possible: outdoor construction is allowed at temperatures of -10°C.
5. Strong durability: This product is an inorganic cementing material, and its service life is greater than that of the base concrete. After millions of fatigue tests, there is no significant change in strength after 50 freeze-thaw cycles. The strength is significantly improved after soaking in engine oil for 30 days.
Baidu Encyclopedia - Grouting Materials
The latest technical standards for wind power grouting materials
Hello! There are many types of grouting materials, and the prices are also different. The general price on the market is 850-2600 yuan/ton. The uses are different, and the prices are also different. You'd better know what they are used for and choose the right grouting material. This is very important. , the dosage of one cubic meter is: 2.28-2.4 tons!
The above is Zhuniu grouting material’s answer for you! Hope this helps you! Thanks!
1. The size and particle size requirements of grouting materials: coarse materials should be between 16 and 65 mm, and fine materials should be between 0.075 and 2 mm.
2. Quality requirements for wind power grouting materials: compressive strength ≥15N/mm2, water absorption ≤4%, elasticity and toughness ≥50%, wind pressure resistance ≥2.0kPa, surface adhesion ≥80% , the density is normal.
3. Quality requirements for wind power grouting materials: compressive strength ≥15N/mm2, water absorption ≤4%, elasticity and toughness ≥50%, wind pressure resistance ≥2.0kPa, surface adhesion ≥80% , the density is normal.