The measurement method of the Great Wall Fengjun 5 generator is as follows:
1. Turn the multimeter knob to the DC voltage 30V range, connect the red test lead to the "armature" terminal of the generator, and the black test lead to the casing. Let the engine rotate at above medium speed.
2. The voltage value of the 2V electrical system should be around 14V, and the voltage value of the 24V electrical system should be around 28V. If the measured voltage is the battery voltage, it means the car generator is broken.
How to install the Great Wall Fengjun five accessory booster pump belt
on the generator.
Shifengfengjun 1460J regulator, this one is on the generator. The regulator is where the live wire screw is installed behind the generator.
It is cheap, has strong carrying capacity and low fuel consumption, and is deeply loved by the general public. Powered by a Shifeng 34-horsepower diesel engine, the carriage length is 2.7 meters, the width is 1.6 meters, and the railing height is 0.5 meters.
The installation method of the Great Wall Fengjun five-accessory booster pump belt is as follows:
1. Pull out the generator main shaft to facilitate subsequent winding of the belt.
2. Adjust the position of the generator main shaft.
3. The two idler wheels of the generator are pulled outward.
4. Wrap the belt around the idler pulley of the generator.