The news that a 100-meter-high wind turbine collapsed into several sections in Gaoyou Town, Yangzhou, Jiangsu Province, has attracted the attention of netizens. Although the precise cause of the wind turbine collapse is still under investigation. The authorities have not yet given a clear reason. But netizens also came up with their own hypotheses as to the cause of the collapse. Among them, being blown away by strong winds was the most likely cause of the collapse speculated by netizens.
The reason why this 100 meter high wind turbine collapsed. First of all, it was probably blown away by the wind. The most likely reason for the collapse of this 200 meter high wind turbine is that it was blown away by too much wind. After all, such a tall generator is likely to break and collapse when encountering windsstrong. strong>Second, electricity production. There is something wrong with the quality of the machine. Although the quality of each generator is tested when it leaves the factory, there may be inferior products in the market, so inferior quality may also be a reason for the generator to collapse; Finally, there is the question of installation. Wind turbines also have very high installation requirements. During the installation process, any errors and irregularities may cause problems when using the wind turbine.
1. Caused by strong winds.On the day of the incident, the wind in Gaoyou City was still very strong. Therefore, strong winds were the main cause of the wind turbine breaking and collapsing. After all, the wind power that each wind turbine can withstand is limited. If the wind is too strong, the generator may be reversedrsé.
2. Generator quality issues.Although the generators that may enter the market have been inspected, it is also very likely that generators with quality defects will enter the market. If the quality of the generator is not good, it is also very likely to be damaged. during use. Broken and collapsed due to quality problems.
3. Installation issues.Since wind turbines have very high installation requirements, if such a large generator must follow the installation process and specifications step by step, if there are small errors and gaps during the process of installation, this may cause damage to the generator. collapsed.