1. Chassis installation, remove the elbow screw and pressure plate from the column, insert the column into the base, place the pressure plate on the bottom of the chassis and tighten it clockwise with the dome locking screw.
2. Adjust the telescopic rod. To adjust the telescopic rod, first loosen the lifting lock nut, remove the lifting pipe from the column and lock it with the lifting lock nut.
3. Body adjustment: To adjust the fuselage, loosen the clamping nut at the bottom of the fuselage, insert the fuselage into the lifting tube, tighten the clamping nut, loosen the lifting locknut and adjust to the required height. Tighten the nut.
4. Install the rear grille, unscrew the click shaft blade fixing nut, then unscrew the triangle nut, align the corresponding holes to install the rear grille, and tighten the grille nut.
5. Installremove the fan blade. The groove behind the fan blade is glued to the motor limit pin. Tighten the fan blade nut counterclockwise.
6. Install the front grille, install the front grille and fix it, and an electric pedestal fan is assembled.