Wind turbine: As the name suggests, it uses wind energy to produce electricity. The wind drives the blades, and the blades drive the generator (the wind power generator acts as a motor when it starts and turns into a generator when it starts. it reaches the rated speed)
Hydro generator: The water flow drives the hydraulic turbine, and the hydraulic turbine drives the generator
Except for the same power generation principle, wind turbines and hydro generators are different. So are the specific differences. There are so many, I don't know what aspect you want to know!
How to make a simple wind turbine~~~~
Biogas involves isolating organic matter such as human and animal excrement, crop straw, etc. from the air. (reducing conditions), and must have a suitable temperature and combustible gas produced by micro fermentationObienne under humidity. The main component of biogas is methane, which represents around 60 to 80% of the different gases produced. Methane is an ideal gaseous fuel. It is colorless and odorless and burns when mixed with an appropriate amount of air. The calorific value of pure methane is 34,000 joules per cubic meter and the calorific value of biogas is approximately 20,800 to 23,600 joules per cubic meter. In other words, after complete combustion of 1 cubic meter of biogas, it can produce heat equivalent to that provided by 0.7 kilograms of anthracite. The use of this combustible gas to produce electricity is biogas electricity production.
Wind power generation uses wind energy to push the blades to rotate and drive the generator to produce electricity. This “rotating blade” mechanism is called a “wind turbine”.
You must first own a wind turbine to receive energywind turbine. Then make a device like the chain drive of a bicycle to transmit the wind force received by the windmill to the generator, and then install the generator. In this way, a small and simple generator is ready.
But it doesn't matter when it's windy. What if there’s no wind? Haha, the equipment to store electricity is quite expensive.
Added answer
I think it may not be easy for you to do it yourself. First of all, the design of the fan blades should always remain facing the direction of the wind, and it should be strong. Additionally, to drive the generator when the blades are rotating, you must at least have a speed-increasing device in order to obtain sufficient power. Recently you need to configure a battery.