If Ruifeng S7 uses good oil, it is estimated that the first maintenance of the car in a repair shop will cost about 600 yuan.
The contents of Ruifeng s7 maintenance manual include: maintenance time, maintenance cycle and main content.
Pay attention to the maintenance of Ruifeng S7:
1. The fuel filter element and air filter element should be replaced every 10,000 kilometers.
The air filter element should be replaced every year or approximately 20,000 kilometers.
2. At 40,000 kilometers, the entire vehicle's oil needs to be changed.
3. Check the gearbox at each service. Although it is not necessary to change the oil, you should check the gearbox oil level regularly and do not change the original factory oil without authorization.
4. Check spark plugs every 40,000 kilometers and replace them every 80,000 kmilometers.
Other relevant inspection items:
1. Check if the car's coolant level meets the requirements.
2. Check the brake fluid, brake system and oil leaks.
3. Check if the oil level in the power steering reservoir meets requirements.
4. Check battery and window cleaner levels.
5. Check if the generator and air conditioning system are working properly.
6. Check if the steering is light, flexible and reliable, and if the front wheel swings left or right or derails.
7. Check the working status of the lights and horns, and whether the vehicle's front and rear lights are complete (including headlights, width lights, turn signals, brake lights, reversing lights and fog lights ). ).
8. Check the pressure and wear of the car tires, and replace the position of thetires depending on wear.
9. Check the battery status.
10. Check the working condition of the engine, whether it is easy to start, whether the operation is smooth, whether the exhaust gas is normal (meaning the exhaust gas reaches the standard), whether the water the oil temperature and pressure meet the requirements, the speed is stable, and there is no abnormal noise.
11. Check whether the frame and steering gear are flexible, bolts are tight, and all pipe joints and tees should be intact, tightly coupled and airtight.
12. Check whether the relevant parts of the vehicle need lubrication.
Millions in car purchase subsidies
1. Loosen the generator fixing screw and the belt tightness adjustment screw.
2. Place the generator against the engine so that the distance between the pulleyss is the shortest, then place the belt cover on the rocker hammer.
3. Adjust the belt tightness to the appropriate level, tighten the motor mounting screws and adjust the screws.