Causes for June 5 fault light:
1. There are too many carbon deposits inside the engine. The gasoline sprayed from the injector will be absorbed by a large amount of carbon deposits during cold starting. , causing mixing during cold starting. If the gas is too thin, it will be difficult to start and it will be easy to get into the car until the gasoline absorbed by carbon deposits is saturated;
But once the car landed, the gasoline adsorbed on the carbon deposits will be reinhaled into the cylinder to be burned, making the mixture rich. The engine's combustible mixture is sometimes thin and sometimes thick, causing jitter at idle after a cold start.
Solution: Clean carbon deposits inside the engine and perform regular vehicle maintenance;
2. Most of the faults caused by misfire are spark plugs, ignition coils, etc.This can be fixed by removing carbon deposits in the cylinder or replacing parts;
Solution: Feng's fault light on June 5 proves that there is a problem with the engine of the car. Let's check it at 4 seconds. If you want to eliminate it, only normal ones can be eliminated.
How to troubleshoot the error light: You can remove the fuse to clear the error code. If the problem cannot be resolved, go to a service facility and use a decoder to clear the fault code. If it cannot be removed, it must be repaired. Typically, a decoder is used to clear error codes, and some units will charge a small labor fee.
A motor is a machine that converts a form of energy into mechanical energy. Its function is to convert chemical energy after combustion of a liquid or gas into thermal energy, then transform the thermal energy into energymechanism to produce energy to the outside world. The power of a car comes from the engine.
Depending on the fuel used, common engines can be divided into gasoline engines (gasoline engines for short) and diesel engines (diesel engines for short). Gasoline engines are used as fuel and diesel engines are used as fuel.
One million car purchase subsidies
I recently bought a Great Wall Feijun 5 due to business needs. The car drives well and has strong power. I recently discovered that when the car is idling, the engine vibrates and there is an obvious feeling in the cabin. I wonder if this has happened to any of my fellow runners? Due to business needs, I recently purchased a Great Wall Fengjun 5 (check transaction price | model details). The car drives well and has strong power. I recently discoveredthat when the car is idling, the engine vibrates and there is an obvious feeling in the cabin. I wonder if this has happened to any of my fellow runners? Although our independent brands have made unprecedented progress in automobile manufacturing technology, some details, such as material strength, are still far behind. Your jitter is caused by insufficient strength of the machine shoe materials. Irregular shaking for a few seconds indicates that your car's mileage is not very high. The main reasons are: shaking caused by poor fuel combustion and shaking caused by excessive carbon deposits. If the mileage is low, the carbon deposition factor should not be that significant. Regardless of the above factor related to the oil line, it is better to clean the oil line first and check theerror code if there is none. fault code, it is indeed a soft oil line fault. You can use this series of fuel cleaners from Si/You*Pu to use it in the fuel tank. After running a tank of fuel, the vibrations will be greatly improved. Is this really the case you mentioned? Regular gas station? The engine The vibration could be gasolineThe marking is not up to standard, causing the engine to knock. If you are worried, you can go to the after-sales service to check. After all, the new car is still under warranty. @2019