What type of base? Is it the cabin chassis? Or the bases, or the base ring?
How powerful is the wind turbine? How tall is the tower?
If you are asking about foundation, what type of foundation is used? Is it the gravity type?
If the base you're talking about refers to the cabin chassis, assuming it's two megawatts, and assuming it's the one we designed, then: it weighs about 15, 9 kg of ductile and blunt iron, and requires tens of Ten thousand.
If what you are talking about is basic, assuming it is 2 MW, the amount of steel used is only a few tens of tons. It's hard to say what the cost is.
Will foundation height affect wind power generation?
400~600mm.
The wind base screw spacing should generally be between 400-600mm. Specific requirementss should be determined based on the diameter and height of the water stop screws used during installation. actual construction process.
The thread is actually the pitch. Pitch, the axial distance between the corresponding points of two adjacent teeth on the thread.
The height of the foundations will affect wind energy production. According to the request for relevant public information: the types of wind power are divided into horizontal axis wind power, wind power and vertical axis wind power, but regardless of the type, its power generation principle is the same . Only one wind turbine is made of it. consists of several parts. The bottom one is the base, which serves as a foundation to strengthen the tower. Secondly, there are cables connecting the generator and the substation under the base, which play a role in power transmission. part of the tower. The magnitude of the wind force also differs depending onthe heights.