Common cooling methods for turbogenerators include:
(1) Air cooling. It is divided into open air cooling and closed circulation air cooling. So-called open-air cooling consists of the fact that in ordinary small generators the generator fan draws cold air into the engine from the factory building, cools each part, and then exhausts it out of the machine . Closed cycle air cooling is used in large and medium sized generators. After the cooling air exits the generator, it is conducted under the machine pit. After being cooled by a set of air coolers, it is driven into the engine by one. fan. This air always circulates inside to keep the machine clean.
(2) Water cooling. Generally, it is a double internal water cooling, that is to say that the conductorss of the stator winding and the rotor excitation winding are hollow, the cooling water passes inside the conductors and the stator bore is always cooled by air. Although the cooling efficiency is high, the interior of the driver is prone to scaling and clogging.
(3) Hydrogen cooling. It is divided into two cooling methods: external hydrogen cooling and hydrogen water cooling. External hydrogen cooling is the same as air cooling, except the cooling medium changes from air to hydrogen, but the hydrogen cooler is inside the machine. The difference between water-hydrogen cooling and hydrogen cooling is that the cooling water passes inside the stator winding conductor, and the rest is the same as external hydrogen cooling.
250kw
Generally speaking, the power of generator air coolers that meet national standards is 250 kilowatts. There are national standards, otherwise there would be no certificate. compliance.
Working principle: The generator is mainly composed of stator, rotor, end cover, brush, base and bearings. The stator consists of a machine base, a stator core, a wire winding and other structural parts that secure these parts. The rotor consists of the rotor core, rotor magnetic poles (with magnetic stop pole windings), slip rings (also known as copper slip rings), fans and rotating shafts.