Above the generator.
Shifengfengjun 1460J regulator, this one is on the generator. The regulator is where the live wire screw is installed behind the generator.
It is cheap, has strong carrying capacity and low fuel consumption, and is deeply loved by the general public. Powered by 34 horsepower Shifeng diesel engine, the length of the trolley is 2.7 meters, the width is 1.6 meters, and the height of the ramp is 0.5 meters.
The generator of the Great Wall Pickup Fengjun 6 diesel version does not generate electricity
The installation method of the Great Wall Fengjun five-prop booster pump belt is the following:
1. Remove the main shaft from the generator, to facilitate subsequent winding of the belt.
2. Adjust the position of the generator main shaft.
3. The two idler wheels of the generator are pulled outwardseur.
4. Wrap the belt around the generator idler pulley.
First check if the excitation circuit is broken and the fuse is blown.
If the machine is not producing electricity, it may be a problem with the generator or generator relay. The engine burns oil, or the oil pressure is insufficient, etc. For reference only, as for the engine oil light staying on, it may be due to a lack of engine oil. After replacing the wastegate, the Great Wall Fengjun 6 diesel pickup truck sped away, causing the engine to fail to start properly and vibrating. and was making abnormal noises, and the car's idling engine was above the throttle sender. It is mainly used to support the car's idling speed. Its purpose is to adjust the idle speed according to the engine load at idle speed. If the idle speedshakes, you can check the fluctuation of the idle speed meter needle, which usually. indicates poor combustion.