There are many. After checking the barrel of Mitsubishi Motors air gun, the small sleeve size is commonly used in 8-32, the medium size is 18, 19, 21, 22, 24, 27, 30 and 32, and the large size is is 27, 30, 32, 33, 34, 36, 38, 41, 46, 50, 55, 60, 65, 70.
What is the accessories copper set for air guns for air tools?
Summary: What is a wind cannon machine? The air cannon is a pneumatic tool. It gets its name because it makes a loud noise like a cannon when it works. It is also called a pneumatic wrench. The air wrench is also called a combination of a ratchet wrench and a power tool. It is primarily a tool that provides high torque with minimal consumption. Air gun machines are used for loading and unloading screws and are widely used in assembly and maintenance, chain assemblye production, etc. in automobile repair, automobile manufacturing, mining, mining, woodworking machinery and other industries. Let's take a look at the model and structure of the air cannon machine! What is a "wind cannon"?
The "wind cannon" is actually a portable machine that uses air pressure to load and unload car tires. It is called a “wind cannon” because it produces a “bang bang”. " sounds when starting. A man with superb technology A tire repairman can repair a tire in just 20 minutes - first remove the tire with a "wind cannon", then polish it, apply glue, apply raw rubber, then press and heat it with a heating plate, all in one go
The structure of the wind cannon machine
Appearance:
1. p>
1. Some people who have never seen it before will say what it is when they see it.ur first time.
The square part of the connection sleeve is 0.5 inch long. Relatively small air gun, suitable for removing screws from car tires.
2. Square inch head, generally suitable for large cars, trucks and buses
3. and 3/8.
2. Internal structure:
There are many structures: single hammer with pin, double hammer with pin, triple hammer with pin, four hammer with pin, double. ring structure and single hammer structure without pin
1. The main structure now is the double ring structure, which is mainly used in small wind cannons, because the torque generated by this structure is much greater. than that of a single hammer, and it also has higher requirements for materials. If this structure is applied to a large wind cannon, its striking block (hammer block) will be very easy to break
2.. The main structure of the large wind cannon is a single pinless hammer. This structure is currently the most ideal structure in terms of resistance to attacks. Single hammer structure wind cannon WM-3902
Maximum torque 2800 N.M
No-load speed 4500 rpm
Head size Drive 1 IN
Drive head length 8, 3IN
Air intake pipe diameter 13MM
Inlet pressure 10 -13kg/cm?
Weight 13.4KG
WM-3905 single hammer structure air gun
Maximum torque 3800N.M
No-load speed 3800RPM
Drive head size 1IN
Drive head length 8, 3IN
Pipe diameter inlet pressure 13MM
Inlet pressure 10-14kg/cm?
Weight 16.5KG
Single hammer structure powerful air cannon WM-3955 < /p>
Maximum torque 4500N.M
No-load speed 3300RPM
Drive head size 1IN
Length of the TetDrive e 8, 3IN
Inlet pipe diameter 13MM
Inlet pressure 12-15kg/cm?
Weight 19KG
p>Recommended reading
Hardware tools encyclopedia What are the commonly used hardware tools?
What is wind screwdriver? Principle of the pneumatic screwdriver Principle of the wind screwdriver
What is the wind cannon? Cannon Model classification
Pneumatic grinder Principle of pneumatic grinder How to use pneumatic grinder
Working principle of pneumatic pick How to use pneumatic pick
Air pick gun air blown Characteristics of the blow gun and the precautions for using the dust blower
What is the principle of the pneumatic nail gun? Classification and model of pneumatic nail gun
What is the principle of pneumatic hammer? categories?
How to install the inside of the air cannon handle
This is notnot a copper sleeve but a sleeve, which is used on the pneumatic wrench and the head of the air gun to be placed on the square head. There are many specifications of accessory sleeves, including long sleeves, short sleeves and universal sleeves. You can choose the type according to the environment. Of course, there are also custom designs such as extended sleeves. Regardless, it can be said that they are constantly evolving and when purchasing pneumatic tools it is best to ask the supplier to prepare the required sockets.
A wind cannon is actually a pneumatic tool, but it is called a wind cannon because of its loud noise. How to use and operate the wind cannon.
1. Install the quick connector and connect the air hose to the air inlet of the air cannon. 2. Use a special wrench to unscrew the oil filler screw hole and addez a small amount of. lubricating oil included in the original machine, retighten the screws and allow the tool to idle for 3-5 seconds to ensure the engine is fully lubricated. 3. Hold the handle with your left hand and the closing lid handle with it. your right hand. Lift the air cannon to align and insert the sleeve. It must be disassembled and assembled. 4. Press the trigger with the palm of your right hand and the wind cannon starts working.