Hand tools, wrenches, including socket wrenches, Torx wrenches, open-end wrenches, adjustable wrenches, hex wrenches (for hexagon socket screws), screwdrivers (for slotted or Phillips screw caps), etc. .
Pneumatic, a tool that uses compressed air as power and a socket wrench, such as an air gun, air cannon, etc.
The electric wrench is also a power tool that uses a socket head and a lithium or 220 V AC battery to drive the motor.
Is it better to use plum blossom type or hexagonal type for the head of the heavy-duty wind cannon?
1/2 wind< /strong> WrenchThe corresponding wrench is 1/2 sleeves 9#, 10#, 11#, 13#, 14#, 17#, 19#, 22#, 24#, 27#, etc.
1 inch wind barrel sleeves are 17#, 19#, 21#, 22#, 27#, 28#, 30#, 32#, 33#, 34# , 35#, 36#, 38#, 41#, 46#, 48#, 50#, 55#, 60#, 65#, 75#.
The corresponding 3/4 wind key has a 3/4 socket.
The cannonair is a pneumatic tool. It gets its name because it makes a loud noise like a cannon when it works. It is also called a pneumatic wrench. Its energy source is compressed air produced by the air compressor. When compressed air enters the cylinder of the air cannon, it drives the turbine inside to rotate and generates rotational power.
The turbine then drives the connected striking parts to perform a hammering-like motion. After each strike, the screws are tightened or removed. It is an effective and safe tool for removing and installing screws. The force generated by a large wind cannon is equivalent to that of two adults using a wrench more than two meters long to tighten a screw.
Its power is generally proportional to the pressure of the air compressor. The higher the pressure, the greater the force, and vice versa. Therefore, once too much pressure is used,the screws are easily damaged when tightening the screws.
The hexagon is good. It is more common and more convenient to use hexagonal head for heavy-duty air cannons, because the hexagonal head can provide better power transmission and gripping effect, making installation and disassembly more convenient. Although the plum blossom type may have some advantages in some particular scenarios, in general, the hexagonal type socket head is more common and suitable for use in most situations.