It works. It appears from the generator's instruction manual that the gasoline engine removed from the generator can be used alone. The gas tank switch should be turned on, the flameout switch should also be turned on and the power supply on. The output switch should be turned to the off position, turn the shock absorber to the closed position, pull the start pull plate, and after the machine starts, turn the shock absorber to the opposite position, close the switch and send power, then it can be used.
What should you pay attention to when using a gasoline generator for the first time?
The installation method of the manual gasoline generator pull plate buckle is the following.
1. Pull the hook part of the pull plate loop to the position you want to install it and hook itto the generator housing.
2. Place a screwdriver or other corresponding tools into the hook of the pull plate buckle to fix the contact between the pull plate buckle and the generator shell.
3. Insert the two pull plate buckle bolts into the holes in the generator housing and secure the bolts to complete the installation.
4. Use a screwdriver or other corresponding tools to fix the pull plate buckle bolts to make it securely installed.
Please read the instructions carefully before use:
1. Before use, you must add special engine oil for gasoline engines (four-stroke gasoline engine oil). so that the generator can be placed horizontally without overflowing. Just in case, if there is not enough oil, the machine will not start and too much oil will damage the engine. It is preferable to useer standard engine oil above the SG level. Change the oil after 20 hours of operation for the new machine and change the oil after 100 hours for the second time. After that, the oil will be changed according to the color of the oil.
2. The gasoline must be clean and compliant with standards (gasoline greater than 93#). Please use the fuel filter when filling. Do not overfill to avoid overflowing due to heat. the machine is working, to avoid fires. 3. Start the cold engine: open the throttle valve of the fuel valve, close the ignition switch, put the shock absorber in the closed state (towards the panel side), gently pull the cable from the plate traction When you feel resistance, pull the cable quickly. and loudly, and the engine starts, gently lower the cable and put the shock absorber in the open state (do not start under load). 4. Once the generator starts, observe que the generator voltmeter indicates normal before plugging in the output jack, turning off the output switch and energizing the equipment. If the displayed voltage exceeds 240 V or is lower than 180 V, do not supply power. to the equipment to avoid unnecessary losses.
5. When you turn off the generator, you must first turn off the output switch - close the oil valve - turn off the ignition switch. 6. The fuel filter screen and air filter core at the bottom of the fuel tank should be checked and cleaned regularly. The air filter core must not be disturbed. After cleaning with a neutral detergent (hot soapy water is also acceptable), dry it. the rest of the detergent and let it dry. 7. Do not replace spark plugs casually, otherwise the engine will be damaged.
8. If the generator does not start, runs erratically, shakes or stalls during operationent, this is usually due to a clogged carburetor. The fault can be eliminated after cleaning the carburetor. do not adjust the throttle and carburetor speed.
10. If the voltmeter is not powered after the generator starts to work normally, voltage value indication, even if the output switch is closed, there is no voltage output. This phenomenon is a loss of excitation fault. When the generator is running, you can use the 12V power supply to touch momentarily. the output jack and the generator will immediately return to normal. 11. Do not connect the generator to the building's electrical system.
12. Generators should be used in a ventilated area. Exhaust gases contain a large amount of toxins and inhaling large quantities will cause death.
Fuheng Generator will give you the answer for your reference and we hope to adopt it.