No. According to relevant public information, the wind power generation voltage is generally in the range of kilovolt. The alternating current generated by the wind turbine is amplified by a transformer, then transported to the substation, then raised to a voltage level of 10 kV, 35 kV or even higher via the step-up transformer, and finally sent to the power grid. .
How do we produce electricity?
New energy production projects are also gradually opening up. Wind power, as an important part of new energy generation, is very important in daily life. The gradual implementation of wind power projects requires supporting transmission equipment in the wind power production process. Wind power generation sites are typically located in mountainous or coastal areas with relatively high altitudes and strong winds. In these areas,relevant management operations are generally not organized. Maintenance personnel generally use intelligent transformer equipment for maintenance, so the current utilization rate of prefabricated cabins is still acceptable.
Hydroelectric power plants rely on the impact of water to impact the turbine blades to operate the turbine and generate mechanical power. The hydraulic turbine drives the generator, which spins and converts magnetic energy into electrical energy. Thermal power plants burn coal and use the thermal energy from burning coal to boil water to produce water vapor. The water vapor powers a steam turbine which drives a generator which converts magnetic energy into electrical energy. Nuclear power plants also use thermal energy generated by nuclear reactions to produceire of water vapor. The water vapor powers a steam turbine which turns a generator, which converts magnetic energy into electrical energy. The electricity generated by the alternator is alternating current (the DC generator generates direct current). After a voltage transformation (step-up), it is sent to the large electrical network then to the substation. The substation sends it and then distributes it. sends it to where it is to be used. After being processed (degraded) again, it is sent to thousands of homes. Alternating current is a current that changes over time and cannot be stored. Direct current can be stored by converting it into chemical energy.