The installation steps of the Great Wall Fengjun 5 pickup generator belt are as follows:
1. First, remove the main shaft of the generator to facilitate subsequent belt winding.
2. Then finely adjust the position of the generator main shaft.
3. Then pull the two idler wheels of the generator outwards.
4. Then wrap the generator belt around the generator main shaft.
5. Then wrap the belt around the generator idler pulley.
6. Install the generator housing to facilitate belt installation.
First check if the excitation circuit is broken and the fuse is blown.
If the machine is not producing electricity, it may be a problem with the generator or generator relay. The engine burns oil, or the oil pressure is insufficient, etc. For referenceHowever, as for the engine oil light that stays on, this may be due to a lack of engine oil. After replacing the wastegate, the Great Wall Fengjun 6 diesel pickup truck sped away, causing the engine to fail to start properly and vibrating. and was making abnormal noises, and the car's idling engine was above the throttle sender. It is mainly used to support the car's idling speed. Its purpose is to adjust the idle speed according to the engine load at idle speed. If the idle speed is shaking, you can check the fluctuation of the idle speed meter needle, which usually. indicates poor combustion.