The steps to convert a single-cylinder diesel engine to electric start are as follows:
The first step: purchase the ring gear, flywheel generator, rectifier-regulator, starter, battery and the ignition lock.
Step 2: Connect the two wires from the flywheel generator to the voltage regulator
Step 3: Connect one end of the voltage regulator to ground and the other to the ignition lock
p>Step 4: Connect the other two wires from the ignition switch to the starter relay and the starter power terminal.
Step 5: Connect the positive terminal of the battery to the power terminal of the starter, and connect one end to ground
Note: Make sure all three ignition switch wires are connected to each other during startup. During operation, the voltage regulator arrives and is connected to the starter motor wire. extinction isoff, make sure all three wires are not connected. If you want the ignition lock to have a power off function, you need to add another one.
Working principle of the. air cannon:
During operation of the pneumatic air cannon, its power comes from the compressed air produced by the air compressor. Once the compressed air enters the cylinder of the air cannon, it drives the turbine inside to rotate to generate. rotational power. At the same time, the turbine drives the connected striking parts to perform a hammering-like movement. After each strike, the screws are tightened or removed.
The most remarkable thing about the pneumatic air cannon is that the force it generates is generally proportional to the pressure of the air compressor and exceeds the ability of two adults to tighten the bolts with a key more than two meters long. This is equivalent to a pneumatic air cannonessential wherever there is disassembly and assembly of bolts.
Detailed information:
Wind cannon application:
In order to remove car tires faster, the emergence of pneumatic air cannon is undoubtedly very powerful. This is an efficient and safe pneumatic tool for removing and installing screws. It is widely used in car tire disassembly and important mechanical organization and maintenance. According to the structure, there are generally single hammers with pins, double hammers with pins, three hammers with pins, four hammers with pins, double ring structures and single hammers without pins.
High torque, light weight, no fatigue during prolonged use and long service life. Wind cannons are widely used in machinery manufacturing and maintenance and are also suitable for variouserse industries such as the petrochemical industry, railway bridges, shipbuilding and power generation.
Ifeng.com-Structural principle of pneumatic wind cannon