You can measure the resistance of the injector. If the resistance is around 6-9Ω, it is generally normal.
The voltage is generally the generator voltage, which is about 14V.
Made purely by hand, I hope you will adopt it, thank you. If you have a problem with your car, ask the auto guru. Professional technicians from 4S stores can solve the problem within 10 minutes.
The installation steps of the Great Wall Fengjun 5 pick-up generator belt are as follows:
1. First, remove the main shaft of the generator to make it easier to wind it up later. the belt.
2. Then finely adjust the position of the generator main shaft.
3. Then pull the two rollers of the generator outwards.
4. Then wrap the generator belt around the generator main shaft.
5. Then wrap the strap arounde the generator return pulley.
6. Install the generator housing to facilitate belt installation.