The diagram for making a bamboo water windmill is as follows:
The bamboo windmill is a unique musical instrument which can help people enjoy melodious music. To make a bamboo windmill, there are several steps to follow.
First, prepare the materials. You should be prepared to choose a bamboo tube with a moderate diameter and a length of around 50 cm to ensure a solid texture. Materials such as wooden strips, silk thread, duct tape, cotton rope, screws and a lighter.
Second, make a bamboo tube. Cut the bamboo tube in half widthwise, grind it flat, then cut both ends of the bamboo tube into smaller pieces to form a small round mouth. Next, place the wooden strips on both ends of the bamboo tube and secure the wooden strips and the bamboo tube with tape.
Thirdment, make the leaves. The strips of wood are flattened to form leaves, then silk thread is wrapped around the leaves to make them stronger. Sheets of paper or plastic: used to make wind turbine blades.
Fourth, make a cotton rope. Use cotton rope to tie the blades to the wooden strips, then use screws to attach the blades to the wooden strips. Knives, glue, rope, etc.
Finally, use a lighter to light a fire and heat the air in the bamboo tube, and melodious music will be blown. Used to make the shaft of a windmill.
1. Prepare the bamboo tube and cut it to a suitable length, usually 20 to 25 cm. Make sure both ends of the bamboo tube are flat and the cuts are straight.
2. Cut the top end of the bamboo tube into a zigzag shape to form a support for the windmill blades.
3. Fabrick windmill blades: Cut the sheet of paper or plastic into a rectangle that matches the size of the bamboo tube, then cut off the four corners to make it look like a cross. You can also choose other blade shapes, such as diamonds or triangles.
4. Attach the windmill blades to the zigzag shape of the bamboo tube, you can use glue or rope to fix it.
5. Prepare a wooden stick or bamboo stick and insert it into the bottom of the bamboo tube like a handle.
6. Put the bamboo tube in the water to make sure the windmill blades can rotate, and adjust the angle of the blades if necessary.
7. When water flows through the windmill blades, the windmill spins.
Here are the steps to follow to make a bamboo windmill. To make a high-quality bamboo windmill, you need to be patient, careful, maketrial and error, and adjust the thickness of the blades to create a beautiful bamboo windmill with good sound quality.
What is the bamboo tube used to pour water in the courtyard of Japanese houses (when it is full, it is poured with a "tuk" sound ). What is it for?< /h3>
This flowing water The small bamboo tube is called Jinglu, also known as Tianshui, Sengdu and bird scaring device. It is made of bamboo and is one of the representative water containers in Japanese gardens.
Using the lever principle, a certain amount of running water is stored to move the balance of both ends of the bamboo tube (similar to swing), and then one end of the bamboo tube hits stone. to make a sound.
It is used to wash hands, which is a ritual of the Japanese tea ceremony.
The garden of the Japanese teahouse adopts a living roomhermitage-style tea room (the material is a wooden door and a bark ceiling). From the courtyard gate, along the stone path, one reaches the waiting tea room, also made of wood. Along the way, one passes many cobblestone "service stones", which are the places where the teahouse owner receives important receptions. guests and exchange of greetings. Stone wash basin (from the sacred spring of tea rituals and hand purification bowl in the tea garden, and developing a stone group with the wash basin or squatting position as the main scene, with water flowing into the bowl from a bamboo tube and a horizontal bamboo ladle frame at the mouth of the bowl).