2 to 3 minutes. One cubic meter of water is equivalent to one ton of water, one cubic meter is equivalent to 1,000 cubic decimeters, one cubic decimeter is equivalent to 1,000 cubic centimeters and 1 liter is equivalent to 1 cubic decimeter, so after calculation, 1 cubic meter d 'water. = 1,000 liters, and one cubic meter is 1,000 liters. It takes 2 to 3 minutes to pump a cubic volume of water. Water is one of the most common substances, an important resource for the survival of all life, including humans, and the most important component of living organisms.
How many kilowatt hours does it take to heat a cubic meter of water to 50 degrees?
Calculate this way: 1 cubic meter of water = 1,000 cubic decimeters of water = 1000 kg of water. water
1000kg*3600 seconds*24 hours*365 days*9.8 (acceleration of gravity)*35 meters is the energy production (the unit is joule)
< p>If it is 60 meters, simply change 35 in the formula above to 60.What are you talking aboutn high? What is the unit of your i and where does it come from?
This situation typically requires 23.33 kilowatt hours of electricity.
Heating 1 cubic meter of water from 10 degrees to 50 degrees requires approximately 4,200 x 1,000 x 40 = 84 MJ of thermal energy. Under ideal conditions, this requires 23.33 kilowatt hours of electricity, which takes approximately 15.56 hours.
However, the actual heating time and power consumption are affected by many factors, such as the thermal efficiency of the heating tube (usually higher), the thermal capacity of the water tank itself same (because the tank is also heated with the water), water heating. The amount of heat dissipated during the process (depends on the insulation performance of the heating vessel), power supply conditions, etc. Additionally, the specific heat of water is not a constant value.