Use a heating wand. Water (the chemical formula is H?O) is an inorganic substance composed of hydrogen and oxygen. It is non-toxic and drinkable. It is a colorless and odorless transparent liquid at normal temperature and pressure. It is called the source of human life and an important substance for sustaining life. It is also called hydrogen oxide. The most economical way to heat 10 tons of water is to use an electric heating rod. This is also the most energy efficient way, because in this case the electric heating rod exists directly inside the water to heat it. there is almost no thermal energy to dissipate the heat it generates. It can be completely absorbed and used by water.
How many kilowatt hours of electricity are needed to heat 10 tons of water to 40 degrees?
At rated power, heating 10 tons of water from 15 to 55 degrees requires 10 000 kilosatthours. *40/860= 465 kWh, assuming the unit runs 10 hours per day, it requires 46.5 kW of heat.
It is recommended to use a Gree KFRS-65/AS air and energy water heater with a rated power of 14.5 kW or to use a KFRS-18/AS or KFRS -36/AS, which can also meet your needs.
It depends on the power of your heating equipment. If the power is too low, I estimate that you will never be able to heat to 40°. However, this is related to the ambient temperature. If exposed to the sun in summer, the water temperature will exceed 40° without heating equipment. From my many years of professional experience, if it is indoors, if the indoor temperature is not. below 15 degrees, if heating is used, if the heating equipment is powerful enough, it only needs 280 kilowatt hours of electricity. .