Yes, it simply converts electrical energy into thermal energy. There are currently such devices on the market. But you need to consider the power, 24V voltage and the amount of current that can meet the temperature of the water you want to heat. Whose specific heat capacity is 4.2 × 10^3 J/kg. It takes so much heat to heat a kilogram of water. Considering the conversion loss rate, the key is the boiling time and the temperature of the heater. exceed 100°C.
Does 24 volt aquarium water pump save electricity?
3500 rpm. A 24 volt generator can only produce electricity at 3,500 rpm. The power standard of a 24 volt generator in the speed range from 1000 to 2000 rpm is 50%, and the power standard in the speed range from 2000 to 3000 rpm is of 70. -90%, so the average only 3500 rpmin can reach 100% power generation standard.
A generator refers to a mechanical device that converts mechanical energy into electrical energy. It is driven by an electrical machine and converts the energy generated by water flow, air flow, fuel combustion or nuclear fission into mechanical energy and transmits it to the generator, which then transmits it to the converted generator in electrical energy.
The 24V aquarium water pump saves electricity.
These are two different types of electricity. The 220 volt water pump uses alternating current as the power supply, and the 24 volt water pump uses direct current as the power supply. The DC-powered pump is more powerful and uses more electricity, and it produces more efficiency than a 24-volt water pump. Therefore, a water pump of 220 volts uses more electricity than a 24 volt water pump.
Remarks
1. It can be used when the voltage is 15% higher or lower than normal voltage.
2. If the power cord is damaged, please unplug the power immediately.
3. Please clean the rotor and water blade regularly.
4. The user should check whether the rated voltage indicated on the water pump is consistent with the actual voltage before use.
5. When installing or disassembling and cleaning the water pump, you must first unplug the power plug and cut off the power supply to ensure safety.
6. The filter basket and filter cotton should be cleaned frequently to ensure normal water inflow and good filtration effect.
7. Protect the pump body if broken, please stop using it immediately.
8. Maximum immersion depthof the water pump submerged in water is 0.4 meters.