The method of shooting video with watermark camera is as follows:
Tools/Hardware: Apple XR mobile phone, IOS13.7 system, version Mark Watermark Camera 4.2.1.
1. Open the Mark Watermark camera and the software will display the page where the photo was taken.
2. Click the small video text at the bottom of the page to enter video shooting mode and start shooting the video.
3. Click the Watermark Icon Template Library to select the desired watermark.
4. Click the watermark to edit the relevant watermark information.
5. The Mark Watermark camera video also supports segmented shooting, and you can pause it at will during the shooting process to change scenes.
6. Click OK and the watermarked video will be automatically stored in the mobile phone album and synchronized with the video circle.avail and team album of the team.
Ask for help in the secret room in Silent Hill 4. The water world cannot be passed. How to arrange the water turbine generator?
Oh, 1. Plug in the plug with a point,
2. Press "Water", usually it will stop when full
3. Wait until the temperature reaches the appropriate temperature, or press the leak protection button, the indicator light will light up and start electric heating
4 Open the faucet and wait half a minute for the cold. water flows when the temperature is appropriate.
5 Start taking a bath
6. Close the faucet after use, continue to press the water button and wait for the next use. .
How to remove watermark from video
Water Prison
Go through the hole in the bathroom again. This time Henry arrived in a water prison. After avoir past the cell of prisoners calling for help, enter the double door on the left, then go through the small door on the right and emerge into a corridor sloping down. Go to the end, go through the small door and enter the pump room. On the notice board next to the waterwheel, Henry found a key.
snap008
Return to the room behind the two doors, use the key to open the small door on the opposite side and move forward to the circular passage outside. Use the escalator to go up and finally reach the upper tank. Go around to the back and turn the valve to start draining the water. Follow the escalator down the outside hallway to the lower level, enter the two doors, there is a circle of cells, enter the second cell counting clockwise, use the hole in the house to jump and finally reach the public baths. MountainTake the ladder to the center of the exterior corridor and arrive at the Executive Room on the first floor. Use the holes in the surrounding walls to observe the cell situation. Find the cell with a bloodstained bed and a hole. Check the map and note its location. Climb the ladder to the executive room on the second floor. Still looking through the hole in the cell, find the room with the bed of blood and the hole and note its location. There is a valve in the management room on the second floor. Turning it can change the position of the cells on the second floor. Turning the valve to the left moves the cell counterclockwise, turning the valve to the right moves the cell clockwise. Turn the valve so that the second stage cell is in the same disk position as the first stage cell. come lastGo to the third floor and complete the same task.
Return to the third floor of the outer circular passage, find the cell with the blood bed and the hole, and jump from the hole. If the rotation order is correct, you will finally arrive at the kitchen. After removing the door plates from both doors and entering the password 0302 to open the door, Henry found Andrew's body in the house.
The method of removing video watermark is as follows:
Operating environment: Honor MagicBook16Pro, system version is Windows 10 , the software version is HiFormat Video Converter 1.4 .1011.0 etc.
1. First of all, you need to click “Video Watermark” function module in HiFormat Video Converter.
2. Then click the "Add File" button, import the files that need to be deleted and wait patiently for the modification.
3. Then click the “Remove Video Watermark” button to enter the settings window.nset watermark removal to process the watermark area.
4. Next, you need to set the watermark position and watermark transparency. After completing the settings, click the "Confirm" button.
5. After completing the watermark removal settings, click “Process” and wait for a while to complete the watermark removal operation.