Sharing Happy Factory Hard Drive Collection Ideas

Introduction Share ideas to collect all hard drives in Happiness Factory. There are many hard drives around the map in Happiness Factory that players can collect. A good collection idea can help players collect faster.

Sharing Happy Factory Hard Drive Collection Ideas

There are many hard drives on the map in Happiness Factory for players to collect. A good collection idea can help players collect them faster. Let's take a look below.

The idea of ​​collecting all the hard drives

The general idea is:

Use the Explorer to move quickly and avoid enemies

Use the jetpack to perform three-dimensional maneuvers, buffer landing, and carry as much fuel as possible

Come prepared with gas masks, radiation protection suits, and consumables partners to deal with extreme environments

p>

Be ready with electric fence swords and guns, and try your best to bring as many bullets as possible to deal with hostile creatures

Bring maintenance supplies (I was too lazy to count them before departure, so I brought oneset of each), 14 biogenerator materials and 2 sets of biomass (the hatch that consumes the most electricity requires 420 electricity)

Bring inhalants, detonators and explosives

The image below is of the backpack at checkout, and 2 of them were opened during the screenshot

Some suggestions:

It is best to use batteries to power the Explorer. , which is durable and long-lasting, and there are still some to pick up on the road. I took a group and came back with over 30 others.

Bring more consumables for gas masks, at least 30, and 10 for radiation protection are enough.

When the car flips, get out of the car and press E towards the car to restore the posture.

Quickly climb to the high platform: build a watchtower against the cliff, climb to the top and insert a foundation on the mountain wall, fly overand rebuild a watchtower, repeat the cycle to go up, remember to go back and take down the building. This method saves materials and is much faster than laying the foundation all the way.

When you encounter a hatch that requires power, install a remote generator, connect it to the line, put in the fuel, rush to open the door - collect the hard drive - and escape< /p>

Try to minimize the fight, medication may not be enough (this may also be due to my disability)

The electric fencing sword can easily face almost all monsters

Monsters won't hit you once you're in the car (but the spider seems to have a BUG)

When you fall from a height , get out of the car first. The car will hit the car. ground first. You will not be injured when you get in the car whens that you're about to hit the ground.

I missed the quartz crystal when I left Luckily there was only one. You need a place. , and there is a small resource not far from there

You need 2 sets of engines, and a point to the northeast requires 30.

At this time- there, I did a lap and I was missing 2 points. The bottom one was leaking and the top one was missing equipment.

When I came back, I still had this little thing in my bag, and I was almost out of medicine.

Then I discovered a very bad thing: I can't build N scanning machines to scan together. This means that I have to spend 10*80=800=13.5 hours to decrypt the hard drive

It's a shame that there are still some hard drives left and some alternative recipes are not as good as 'before

It doesn't matter how many hard drives are currently missing. drives required for unlockingfull are less than the total number of hard drives on the card. Additionally, you can try the Button Wizard to create a script. The script can be hung up when you sleep at night, and it's not complicated. 6 lines of code to locate 2 points.

Resource distribution list on the Happy Factory map

After placing them and connecting them with wires, each can stably generate 200 MWH of electricity.

Geysers are springs used to deploy geothermal generators

"Happiness Factory" is an open-world, first-person factory building game that incorporates elements of exploration and combat. Players can embark on in-game alien adventures alone, or explore alien planets with friends, build multi-story factories, and enter treadmill heaven!

Happiness Factory Beginner’s Guide

Didistribution of special resources

Reduce the distribution of special resources Distribution of ordinary resources Overclocking Distribution of fragments Transporter, Fart flower, Cave

< p>Satisfactory Happy Factory is a factory building game first-person open-world game that incorporates special elements such as exploration and combat. Today I will bring you the distribution of game resources on the map

The official page of the map is

Screenshots of this chat do not include Mersel balls and red balls which currently have no effect on players. Curved rocks, a large number of fruits and scattered ore pillars are not screenshots, as they are unique collectibles. If necessary, go to the website to check them in detail. .

In this article, if you notice that the photo has been abandoned or that the building has been submerged, don't forgetPlease don't respond to Maomao. . Maomao will re-upload the photos. .

The first thing is the map's blank terrain panel. .

Player spawn point area

Image 1: Grassland, Image 2: Rock Desert, Image 3: Northern Forest, Image 4: Dune Desert. .

The player's landing pod will land randomly anywhere in the area. . But it appears no players have reported landing in the water. .

Special resource distribution

Three mineral points: barren × 9, ordinary × 5. . The third mineral is an unfinished mineral in the game. According to the official wiki, it will be the required material for remote storage in the future. .

Geyser×18. . Geysers are sources used to deploy geothermal generators. Don't worry if geothermal generators don't have a user interface. After placing them and connecting them to wires, each can generate manstable 200 MWH of electricity. .

"Happiness Factory" is a sandbox building game created by the developer of Goat Simulator. Without a good early guide, players won't know what they need to do in the game. Beginner's guide to help players get started with the game.

Beginner's Guide

The new game has 3 images: plain, desert and forest.

Choose any to enter the game. Here I choose the first one and wait for a cutscene.

In the first task, press F to enter disassembly mode, then press the left mouse button to disassemble the hub.

After you take it apart, there will be a prompt on the left to equip the stun gun.

I will translate it briefly:

1. Press the TAB key (the upper part of the keyboard to open the upper case) to open the inventory.

2. Slide the stun gun toward your hand (or double-click on the stun gun).

Equip a stun gun.

Continue searching for iron ore points by pressing the c key according to the task prompts.

Run to the iron ore spot on the heads-up display. You can get leaves along the way, which will be used as energy later.

In the past, iron ore was mined manually by pressing E.

Next, you will be prompted to build a HUB (i.e. the start of everything for you), which I will temporarily call a base.

Find an open spot and press Q to enter build mode and select "hub".

Then click the left mouse button to begin construction.

Look at the 2 exclamation points in the past. According to the task prompts, we need to upgrade this hub at this time. Press E to check the terminal.

Click on “Select amilestone"--"Level 0"--"Hub Upgrade 1", then click Select Milestone below.

Here is the hub terminal:

You can see that to upgrade the hub you need 10 iron bars

Close it and go to the production table

Open the production table. see three production recipes on the left: iron ingots, iron plates and iron bars

1 iron ingot requires 1 iron ore

1 iron plate. iron requires 2 iron ingots

1 iron bar requires 1 iron ingot

Preparation method: Click on the recipe to make, and long press the ** production button below below (if it is gray, it means that the necessary materials are insufficient

I first made 10 iron ingots from the mined iron ore,

and I started making iron bars

After finishing, return to the hub terminal and click on the current milestone.el.

Double-click on the 10 iron bars in the inventory on the right. After sending the iron bars to the hub. terminal, click the ** button below

After that, the whole base will be upgraded and a personal storage box will be added at the bottom left of the terminal

And a bio-generator, which can produce electricity from leaves, wood and other biomass that can be manufactured.

Next, the four tasks in the lower left corner are:

1 Press and hold the C key to select the ore vein you want to find

2 Build an equipment workshop and a portable mining machine

3 Equip a portable miner and attach it to a vein

4 Build a smelter to automatically produce ingots

5 Use biogenerators for your buildings Power supply

Press Q to enter construction mode, select the production item andselect "Equipment Workshop".

Requires 6 iron plates and 6 iron rods.

After selecting a plot of land to build on, enter the equipment workshop.

You can see that 4 iron plates, 8 wires and 4 cables are needed.

Exit the equipment workshop.

Go to the crafting station and find 3 more recipes, copper ingots, wires and cables.

1 copper ore gives one copper ingot

1 copper ingot gives 3 wires

2 wires make one electric wireCable

There are currently no copper mines. Exit the crafting station and long press the C key to select the copper mine.

The method is the same as at the beginning, find the copper vein, press E to mine - go to the crafting station - copper ingot - wire - cable

After obtaining the required materials, it is recommended to first craft 2 portable mining machines,one for iron ore and one for copper.

Run to the ore vein, press the tab to enter the inventory to equip the mining machine, click on the ore vein, and it will automatically mine the ore for you after some time.

After finding the copper mine (limestone mine in the photo), equip the portable mining machine as shown in the photo, then aim at the vein and press the left button.

Then it will mine automatically, which is now much faster than manual mining.

Once you have the copper mine, quickly craft 50 wires, 10 iron plates and 10 iron rods, return to the hub terminal and invest resources on it to upgrade hub 3.

p>

At this time, a new scannable mineral vein will be unlocked - limestone ore - used to make concrete.

There are also constructorss, posts, screws, etc.

Continue to select milestone - hub 3.

Then it was found that the materials needed were 75 iron plates, 10 cables, 10 concrete and 2 reinforced iron plates .

I forgot to mention this before. First press Q to build a foundry. It is recommended to keep it aligned with the ore vein. Then go to the portable mining machine to take the mined ore and send it. at the foundry.

Choose a recipe - Iron Ingot or Copper Ingot (depending on what you want to produce) - and put iron or copper ore into it.

It will not work at the moment and needs to be turned on:

First go to the biomass generator behind the hub - first put the collected leaves or wood into along the way in the Generator.

Then press hotkey 2 to directly enter build mode to connect thegenerator and foundry.

The foundry is now functioning.

After upgrading to Hub 2.

Press C to select limestone, find the vein - mining, I won't go into details one by one here , so far you should make 3 portable mining machines, one for iron ore, one copper mine and limestone mine. Place one.

Once you have a stable source of materials, first obtain 3 reinforced iron plates and 2 cables, then install them into the platform.

Press Q key to enter construction mode - select constructor - place constructor.

First press 2 to click on the biogenerator then click on the foundry.

After installing the builder, it can automatically produce various parts for you. Finally, you no longer need to manually make iron plates, iron rods, fils and cables.

The next steps are more or less the same.

Attached is an image of the current hub 5 configuration.

  • Popular Focus
  • Where is the cheapest battery wholesale?

    Where is the cheapest battery wholesale in Tangxia, Sanyuanli, Baiyun District? There is an enterprise specializing in the independent production of electric vehicles in Tangxia, Sanyuanli, Baiyun District, Baiyun Sanyuanli Avenue, Baiyun Sanyuanli Street
    08-02
  • Four 3.7V lithium batteries in series and parallel produce 7.4V/4.4A. How to reduce it to 4.8V/4.4A?

    Four 3.7V lithium batteries in series and parallel produce 7.4V/4.4A. I personally think it is impossible to reduce it to 4.8V/4.4A. Because the discharge platform of lithium batteries is generally set
    08-10
  • What are the materials of the negative electrodes of lithium batteries?

    What are the materials of the negative electrodes of lithium batteries? The main commercial applications of lithium batteries include graphite, which is a sheet of copper used to guide current and which does not react. another safe
    08-02
  • The difference between 18500 and 26500 batteries

    What is the difference between 18500 and 26500 batteries? The answer above is 18650. The person asking the question should ask what is the difference between 18505 and 26500 batteries. In the case of Fuant ER1
    08-02
  • What does 3.7V 80mAh written on a lithium battery mean?

    What does 3.7V 80mAh written on a lithium battery mean? 3.7 V, 80 mA = 0.08 A, H means 1 hour, or 3600 seconds. Taken together, it is
    08-02
  • How long does a lithium battery (cell phone battery) last?

    How long does a lithium battery (cell phone battery) last? The lifespan of mobile phone batteries, under normal conditions of use and without serious impact, the lifespan set by the manufacturer must be 5 years.
    08-02
  • Will lithium batteries explode when charging?

    Will lithium batteries explode when charged? Will lithium batteries explode when charged? Lithium battery explosions usually occur during the charging process, because the negative electrode material of lithium batteries is graphite or other carbon materi
    08-02
  • Parameters of lgdas31865 lithium battery

    Parameters of lgdas31865 lithium battery The parameters of lgdas31865 lithium battery are as follows: LGDAS31865 is a model 18650 lithium battery with a capacity of
    08-02
  • What are the main components of lithium battery electrolyte?

    What are the main components of lithium battery electrolyte? The composition of lithium battery electrolyte is shown below. 1. Ethylene carbonate: molecular formula C3H4O3. Colorless transparent liquid (>35℃), room temperature
    08-02
  • Who are the lithium battery manufacturers in Shandong?

    What are the lithium battery manufacturers in Shandong? Shandong Shengyang Power Supply Co., Ltd. and Shandong Weineng Environmental Protection Power Technology Co., Ltd. 1. Shandong Shengyang Power Supply Co., Ltd. is located in Shengyang, Qufu City.
    08-02
  • Types of drone batteries available in 2024

    Part 1. Types of drone batteries available in 2024In 2024, drone batteries have advanced significantly, offering a range of options to cater to various needs in
    07-30
  • How long does it take to charge 26650 battery?

    How long does it take to charge a 26650 battery? The charging time for a 26650 battery is generally between 3 and 6 hours, but the precise time depends on the power of the charger and the capacity of the battery. in general
    08-02
  • For what?Sure, here's an article based on the phrase "For what?

    The simple yet profound question, "For what?" often serves as a gateway to deeper reflections on purpose and intention. It is a query that invites us to delve into the reasons behind actions, decisions, and circumstances that shape our lives and the wor
    08-02
  • Choosing the Right Cart Battery

    This comprehensive guide will walk you through everything you need about cart batteries, from understanding different types to making an informed purchase decision.
    08-02
  • 30mAh~500mAh 3.7 V Li-ion Battery

    Welcome to Ufine's collection of 3.7V lithium-ion batteries ranging from 30mAh to 500mAh. Explore a diverse range of compact and lightweight batteries suitable for various electronic devices,
    08-02
  • Here are 10 essential facts about drone batteries for 2024.

    10 Key Facts About Drone Battery for 2024 In 2024, drone batteries have advanced significantly, offering a range of options to cater to various needs in the consumer, commercial, and industrial sectors. Below are the primary types of drone batteries avai
    08-02
  • Could you please explain the difference among IMR, ICR, INR, and IFR 18650 batteries?

    What is the Difference Between IMR, ICR, INR, and IFR 18650 Battery?In 18650 batteries, discerning the differences among IMR, ICR, INR, and IFR types is fundamental for tailored and efficient battery usage. These distinct
    08-02
  • Safety considerations for cart batteries

    Selecting the ideal cart battery is crucial for ensuring optimal performance and longevity of your electric vehicle or vaping device. This comprehensive guide w
    08-01