Wipers are divided into boneless wipers and bone wipers. The installation of wipers mainly depends on the wiper seal and wiper arm.
The bone wiper joint is generally a U-shaped clip, and the wiper arm body is a hook type. The four-step installation method can be easily installed: Step 1: To remove the original wiper blade, press and hold the clip below! To relocate. ;
Step 2: Open the wiper protective cover with one hand and insert the wiper arm hook into the wiper slot with the other hand ; Step 3: Pull the wiper arm and the wiper in opposite directions, and the wiper arm snaps into place. In the wiper slot, click it into place. Step 4: Close the protective cover.
The first step: to remove the original wiper blade, press and hold the clip below! Remove it; Step 2: Lift the front end of the center clip a little for easier installation; Step 3: Insert the center clip and tighten it! It's on! Step 4: Install the Passenger Seat Wiper! Watch the direction and hold tight! It's on!
It should be noted that on some models, the driver's seat and passenger seat wipers are different sizes. Generally, the driver's seat is longer and the passenger's seat is shorter. Do not install them backwards. It doesn't matter if both are the same size.
I hope this helps you and you can adopt it, thank you!
First of all, check whether the packaging of the wiper blades is standardized. As for the product itself, most fake wiper blade covers are relatively soft and can be easily disassembled. Quality abrasive toolslower results in rough work.
Wipers are important safety features. They must be able to effectively shed rain, snow and dirt; resistant to corrosion by acids, alkalis, salt and other harmful substances; the service life reaches 150,000 scraping cycles (passenger cars).
Working principle
The power source of the wiper comes from the electric motor, which is the heart of the entire wiper system. The quality requirements for windshield wiper motors are quite high. It uses a permanent magnet DC motor. The wiper motor installed on the front windshield is usually integrated with the mechanical part of the worm gear.
The function of the worm mechanism is to reduce speed and increase torque. Its output shaft drives a four-bar linkage mechanism, which transforms the motioncontinuous rotation in a left-right oscillating motion.