Hello car owner, this is due to the fact that after passing through water, the belt became wet and slipped, resulting in low power output from the generator. Usually this is caused by the generator belt tensioner breaking. It's not completely broken. But the increase is no longer tight. I hope this will help you. I wish you a good car. If you have any questions about the car, ask the car owner. Professional technicians from 4S stores can solve the problem within 10 minutes.
What should I do if the car generator belt makes noise when wet?
Causes and solutions for belt slippage in 11 Tiida generators:
1. Belt slippage The belt is used for a long time and the belt is stretched, causing slippage.
2. If there is slight slippage, pour water on the belt to fix it.solve the problem. The belt will become slippery and the slipping will become more serious. Only replacing the belt with a new one can completely solve the problem.
3. Oil and wax need to be cleaned, use carburetor cleaning agent.
The generator belt needs to be replaced and the belt tension adjusted.
The generator works with the engine, and its belt will wear normally over time, and its tension will also decrease when exposed to water, the friction between the belt and the pulley will be reduced . , so after prolonged use, the belt tension should be adjusted or replaced with a new belt.