20 cm. Sand coated flat seam construction technology is the most basic seam tracing and gridding. After sealing the primer, stretch the thread, trace the seam, paste textured paper, then directly spray the midcoat and main material, just tear off. the masking paper after spraying. Therefore, it is necessary that the water-coated sand aluminum alloy deep groove is 20cm, which can not only guarantee the flat seam construction technology, but also maximize the product quality.
Is the sand in water deep groove process wider, more expensive?
Hello!
Sand in water has many benefits.
1. High degree of simulation. The water-coated sand imitates the effect of pitted marble, and the stone imitation degree reaches 99%, which is infinitely close to 100%.
2. Performance at high costve. The market price of water-filled sand is about 1/3 of that of marble, and the cost is greatly reduced.
3. Water-based and environmentally friendly. The raw materials of water-filled sand are all environmentally friendly water-based materials or natural non-toxic materials, so you don't need to worry about water-filled sand causing damage to the human body.
4. Long lifespan. If the purchased raw materials are of high quality and the construction team follows standardized procedures, the lifespan of water compacted sand can easily reach more than 30 years!
5. The mass of one square meter of water-coated sand is about 2% of that of marble, so even if the water-coated sand accidentally falls, you don't have to worry about hurting people.
6. High intensity. The surface hardness of water in sand is higher than that of real paint inur stone and water in the water, and it is impact resistant, which is equivalent to adding high-strength protection to the wall.
7. Strong weather resistance. The high-quality emulsion used determines that the water-coated sand has excellent weather resistance, anti-aging, anti-rain, anti-acid rain, anti-mildew and anti-algae, long service life and can be used with confidence. both north and south.
8. Strong waterproofing. Water-coated sand itself is dense, making it difficult for water to penetrate. There is also a transparent and waterproof glossy oil on the surface of the water-coated sand, which prevents dust and other dirt from attaching to it.
9. Practical and adaptable. The water in the sand can not only be sprayed onto various special shapes such as cylinders and curved surfaces; it can also be used on cement brick walls, softse, gypsum, aluminum plates, glass and other basic surfaces, and can be sprayed on any surface. shape according to the shape of the building.
10. Quick build. Sand in water is the same as water in water. It forms in one go and can dry quickly when the temperature is right. The construction period is very short.
If you are satisfied with my answer, you can click Accept to support me. Thank you so much !
Yes. The price of the water-in-sand deep groove process depends on its surface area. As the width increases, the area will also increase and the price will become more expensive. The process of building sand-filled deep grooves in water is as follows: after the base surface is processed, directly draw the seams to divide the grid, use aluminum alloy deep grooves to create a grid effect , then follow the proconstruction process of sand in water. .