What should I do if my cell phone is flooded and cannot be charged?

Introduction What to do if your phone is flooded and can't be charged. If you are using a Huawei phone, in order to reduce your losses, it is recommended to turn off the phone and bring the corresponding purchase receipt to the nearest Huawei customer service center.

What should I do if my cell phone is flooded and cannot be charged?

If you are using a Huawei mobile phone, in order to reduce your losses, it is recommended to turn off the mobile phone and bring the corresponding purchase receipt to the nearest Huawei customer service center for repair. maintenance. If you continue. To use it, you may need to repair it in unofficial service store. This will further damage the internal components. You can check the nearby Huawei customer service center address via a service request in the service store.

Precautions after water or liquid enters the phone:

1. Do not move or shake the phone frequently after water has entered to prevent moisture from spreading inside the phone.

2. Do not blow with a hair dryer or cook at high temperature (including heating in a microwave oven) after water enters, to avoid liquid being blown outinside the phone and the high temperature does not damage the phone.

3. Mobile phones are made of precision electronic components, which may pose potential risks if water enters the environment, so please keep your mobile phone turned off.

4. If there is no backup data, there may be a risk of data loss during maintenance. After going to the Huawei customer service center, you can ask the staff to help you evaluate whether the data can be backed up.

What should I do if my phone gets water?

In daily life, people often accidentally get water on their phone. What should I do if water gets in? The reaction is not to turn on the phone to see if it is broken. This is absolutely false. Let us teach you a good first aid method. First, you need to remove the barrive as quickly as possible. This is the most important step. Life or death almost depends on the timing of this step! Of course, if your phone has been submerged in water for a long time, for example if it has been washed in the washing machine for N hours, you might as well take it out slowly, as quickly as lightning, and not waste it. a few seconds. Once water first enters the phone, provided you remove the battery quickly enough, the phone can usually be saved. Don't worry that the components inside will dissolve in water. Nothing will happen if there is no power supply. The next step is to remove the shell. First remove all removable covers and accessories from the keyboard to see how much water has entered. If you remove the outer shell and find that no water has penetrated inside or only a small amount is visible, congratulations. You only haveu take a hair dryer, patiently and slowly dry the machine a few times, and finally install the battery in the case, and everything is generally fine. If you are not very lucky and find that water is still leaking or even leaking from inside the machine after disassembling the case. Anyway, it looks like there's still some water inside, so it'll be a bit inconvenient. But don't be too nervous. As long as you do not install the battery or turn on the phone, the problem will not get worse. All you have to do is find the disassembly tools, including small Phillips, slotted, hex and torx screwdrivers, flat and angled tweezers, etc. Specific specifications will depend on your model. Friendly Tip: If you feel confused when you see these tools, it is safer to take the machine to experienced people. Hardware damage caused by manual errors is irreversible.ersible, parts must be replaced. Now let's start by disassembling the machine. First, you need to find a small, clean box or bowl to hold the removed small screws, etc. No joke, it's very important! If you don't have experience disassembling machines, it's best to buy a few more to make sorting easier. Additionally, on the desk (I should say worktable) should be covered with a clean piece of white paper and other debris on the table should be removed. This step is not necessary, you can do it yourself. It is best not to use newspapers as it is annoying to find small black or white objects in newspapers. Also do not use plastic paper as objects can easily slide off so it is best to just lay it down. Now unscrew the most visible screws on the surface of the phone (usually hexagonal) one.e by one and place them in a small bowl. Turn them one by one and remember the size, length and installation position. After turning, place the phone on the paper and slowly open it layer by layer. Warning: the most important thing in this step is not to open it! Don't be impatient! The most important thing is to clearly see and memorize the installation position of each open component! Including shape, direction, pros and cons! Separate the open parts one by one on the white paper. If you're afraid you won't remember it, you can draw a box on the white paper to mark or even write an explanation! Note that if there is a cable, do not pull it forcefully. Look at both ends of the cable plug. There are usually small tongue protrusions. Use angled tweezers or other tools to gently lift the small tongue, twisting at both endswithout using too much force. Lift the rear cable and it will naturally loosen. Okay, screen, motherboard, backplane, bezel, etc. are they all separated now? Have you noticed those shiny white metal housings on the motherboard? These are called shields, and some have many round holes. This thing also needs to be open. Usually there is a cover on the back of the shield that can be opened. If you look closely at the edge of the shield, you should be able to see thin tooth-like ridges. Also use a suitable tool to lift these teeth and open them alternately at the four corners. Finally, the top cover will appear. Open all the shields one by one and memorize the positions. Now your cell phone can be considered completely disassembled, and there is no need to move the soldering area. Of course, every phone is different and itmaybe there are things I haven't mentioned. You can check it carefully and process it according to the above operating principles. Now you can comfortably hold the hair dryer, dry the disassembled parts one by one, and then return them to their original position on the white paper. There is another common situation. After drying, you may find some pieces of white or green powdery foreign matter on the motherboard, socket, contacts, shield cover or other places. The more foreign objects there are, the more time passes between the time water enters the machine and the battery is removed. To be honest, this also means that your machine has less hope of resurrection. However, a little hope does not mean there is no hope. Remember to try not to use hard objects to scratch! Unless you are absolutely sure there is no danger. Generally,you can use a toothbrush to remove the powder and brush repeatedly. Of course, toothpaste is not necessary. If it cannot be cleaned, you can dip your toothbrush in water or alcohol and continue brushing. Don't forget to blow dry after brushing. Finally, we went all out and restored the phone in reverse order of how you took it apart. For example, if the last thing you remove is the protective cover, install the protective cover first. I have already mentioned the other key points and will not repeat them. This step depends on your ability to build blocks. The main thing is that if you remember this clearly when disassembling the machine, now it will be very simple. Another thing to pay attention to is the wiring. The cable should be aligned and gently inserted into the socket. Make sure the endsleft and right tees are aligned.It has been inserted all the way, then keep this hand still, use another hand tool to gently press on the small tabs on both ends, check that they are flattened and the cable is firmly buckled. Check again if it is perfectly aligned. If not, remove it and try again. The cable is fragile and easy to damage. Once broken, it cannot be repaired. Remember to be gentle.

What to do if your phone is flooded and can't be turned on

Step one. : Never turn on the phone. Use it first. Use absorbent paper to absorb most of the water, then remove the electrical panel, then wipe the water in the electrical panel slot and on the electrical panel. Step 2: Hold the phone with your hands and shake it vigorously until no more water is sprayed. Then use paper to wipe up the water that has just been releasedby phone! Step 3: Use a hair dryer (set to hot air, I believe you have a hair dryer at home!) and slowly move around the gaps in the battery slot until it be dry! It works like an electrical panel! Haha, it's good! I hope to adopt it!

Methods to deal with liquid in mobile phone:

1. Do not force the phone to turn on as this may cause a short circuit. ;

2. Don't shake the phone too much;

3. Do not heat the phone;

4. use toilet paper and other tools to suck water from the gaps of the phone and dry it as much as possible. When absorbing water, try not to move the phone;

5. Place the phone in a ventilated and dry place and allow excess water on the surface of the phone to dry naturally;

6. The customer service center will take care of this.

  • Popular Focus
  • Where is the cheapest battery wholesale?

    Where is the cheapest battery wholesale in Tangxia, Sanyuanli, Baiyun District? There is an enterprise specializing in the independent production of electric vehicles in Tangxia, Sanyuanli, Baiyun District, Baiyun Sanyuanli Avenue, Baiyun Sanyuanli Street
    08-02
  • Four 3.7V lithium batteries in series and parallel produce 7.4V/4.4A. How to reduce it to 4.8V/4.4A?

    Four 3.7V lithium batteries in series and parallel produce 7.4V/4.4A. I personally think it is impossible to reduce it to 4.8V/4.4A. Because the discharge platform of lithium batteries is generally set
    08-10
  • What are the materials of the negative electrodes of lithium batteries?

    What are the materials of the negative electrodes of lithium batteries? The main commercial applications of lithium batteries include graphite, which is a sheet of copper used to guide current and which does not react. another safe
    08-02
  • The difference between 18500 and 26500 batteries

    What is the difference between 18500 and 26500 batteries? The answer above is 18650. The person asking the question should ask what is the difference between 18505 and 26500 batteries. In the case of Fuant ER1
    08-02
  • What does 3.7V 80mAh written on a lithium battery mean?

    What does 3.7V 80mAh written on a lithium battery mean? 3.7 V, 80 mA = 0.08 A, H means 1 hour, or 3600 seconds. Taken together, it is
    08-02
  • How long does a lithium battery (cell phone battery) last?

    How long does a lithium battery (cell phone battery) last? The lifespan of mobile phone batteries, under normal conditions of use and without serious impact, the lifespan set by the manufacturer must be 5 years.
    08-02
  • Will lithium batteries explode when charging?

    Will lithium batteries explode when charged? Will lithium batteries explode when charged? Lithium battery explosions usually occur during the charging process, because the negative electrode material of lithium batteries is graphite or other carbon materi
    08-02
  • Parameters of lgdas31865 lithium battery

    Parameters of lgdas31865 lithium battery The parameters of lgdas31865 lithium battery are as follows: LGDAS31865 is a model 18650 lithium battery with a capacity of
    08-02
  • What are the main components of lithium battery electrolyte?

    What are the main components of lithium battery electrolyte? The composition of lithium battery electrolyte is shown below. 1. Ethylene carbonate: molecular formula C3H4O3. Colorless transparent liquid (>35℃), room temperature
    08-02
  • Who are the lithium battery manufacturers in Shandong?

    What are the lithium battery manufacturers in Shandong? Shandong Shengyang Power Supply Co., Ltd. and Shandong Weineng Environmental Protection Power Technology Co., Ltd. 1. Shandong Shengyang Power Supply Co., Ltd. is located in Shengyang, Qufu City.
    08-02
  • Types of drone batteries available in 2024

    Part 1. Types of drone batteries available in 2024In 2024, drone batteries have advanced significantly, offering a range of options to cater to various needs in
    07-30
  • How long does it take to charge 26650 battery?

    How long does it take to charge a 26650 battery? The charging time for a 26650 battery is generally between 3 and 6 hours, but the precise time depends on the power of the charger and the capacity of the battery. in general
    08-02
  • For what?Sure, here's an article based on the phrase "For what?

    The simple yet profound question, "For what?" often serves as a gateway to deeper reflections on purpose and intention. It is a query that invites us to delve into the reasons behind actions, decisions, and circumstances that shape our lives and the wor
    08-02
  • Choosing the Right Cart Battery

    This comprehensive guide will walk you through everything you need about cart batteries, from understanding different types to making an informed purchase decision.
    08-02
  • 30mAh~500mAh 3.7 V Li-ion Battery

    Welcome to Ufine's collection of 3.7V lithium-ion batteries ranging from 30mAh to 500mAh. Explore a diverse range of compact and lightweight batteries suitable for various electronic devices,
    08-02
  • Here are 10 essential facts about drone batteries for 2024.

    10 Key Facts About Drone Battery for 2024 In 2024, drone batteries have advanced significantly, offering a range of options to cater to various needs in the consumer, commercial, and industrial sectors. Below are the primary types of drone batteries avai
    08-02
  • Could you please explain the difference among IMR, ICR, INR, and IFR 18650 batteries?

    What is the Difference Between IMR, ICR, INR, and IFR 18650 Battery?In 18650 batteries, discerning the differences among IMR, ICR, INR, and IFR types is fundamental for tailored and efficient battery usage. These distinct
    08-02
  • Safety considerations for cart batteries

    Selecting the ideal cart battery is crucial for ensuring optimal performance and longevity of your electric vehicle or vaping device. This comprehensive guide w
    08-01