There are two types of car water temperature indicator lights: blue and red. If the water temperature light turns blue, this is normal. If the water temperature warning light turns red, it means that the engine cooling system is abnormal, due to lack of engine coolant or leaking engine coolant tank. 'water.
The water temperature light on the vehicle's dashboard usually comes on in two situations. The first is when the vehicle is low on antifreeze, and the water temperature light sets off an alarm. Another problem is that the engine water temperature is too high and the water temperature light will also alarm.
Methods for handling excessively high water temperature:
1. During normal driving, if the water temperature warning light illuminates red, itindicates that the engine water temperature has exceeded the normal operating temperature, the car owner should stop and immediately check whether it continues to drive, in severe cases, the car's water tank will be scrapped and the car owner's maintenance costs will be borne. the car will increase.
2. The reason why the engine water temperature is too high may also be that the engine water circulation is not smooth, causing the temperature to not drop when there is too little antifreeze . it cannot meet the most basic cooling needs of the engine, and the engine water temperature will also occur if it is too high, the cooling fan will stop working and cannot cool the radiator, resulting in will also cause a high water temperature alarm.
3. After parking the vehicle when the temperaturewater is too high, do not turn off the vehicle while idling to allow the vehicle to dissipate heat. Check the different components of the car engine. low, you need to check if there is an antifreeze leak. If detected, when the fan does not rotate, check the relay and fuse, determine the vehicle fault by preliminary inspection, and contact the vehicle repair technician in time for treatment.
There are some common steps to handle the alarm when the generator fluid level drops due to high temperature in the direct fire engine:
1 Stop the generator immediately. and disconnect the power supply. Make sure the generator is in a safe condition.
2. Check if the generator cooling system is operating normally. Make sure the radiator or cooling fan is not blocked or damaged.
3. Check thecoolant level and generator quality. Check that there is sufficient coolant and that there are no leaks or contamination.
4. If necessary, clean dust, debris and grease on the surface of the radiator to ensure good heat dissipation.
5. Check whether the lubricating oil system is working properly and ensure that the lubricating oil level inside the generator is sufficient.