How to Use Car Wash Water Wax

1. How to use car wash wax:

1. First use clean water to rinse the hard particles such as sand floating on the surface of the car 2, configure the car wash water wax detergent according to 1 :150, put it into the high pressure foam spray bottle and spray it all over the car

3. Use a car. Wash the sponge to wipe the dirt all over the car, then rinse all the foam from the car with clean water

4. Finally, use a clean, dry towel to dry the entire car

< strong>2. Pay attention to car washing

1. Do not do when washing a car at high temperature and under the scorching sun, the high temperature and cold water on the car body will cause uneven cold and heat, which will damage the car paint

< p>2. Do not rinse the bodywork with a spray gunhigh pressure water and do not wipe it directly with a cloth, because the dirt on the car body will contain hard particles. .Direct cleaning will scratch the car paint. Generally, use clean water to rinse off the sand floating on the surface of the car first, and then clean it further

3. You must wash your car during the rainy season. The scouring power of rainwater cannot remove the dirt on the car body at all. The adhesion will become one with the car's paint. Additionally, modern rainwater is weakly acidic and if left unwashed for a long time, it will corrode the car.

4. Don't wash the car too frequently. It is not recommended to wash the car more than 4 times a month. Too frequent car washing will also damage the car paint surface.

4. >5. Do not use household detergents or other productshousehold ts When using car wash products, ordinary detergents are generally acidic and alkaline and will corrode the entire car paint and aging rubber. It is recommended to use special car wash water waxes as a cleaning agent, such as products from major brands such as Medige, Cheval, Turtle, 3M etc.