The first thing after the interruption is to check on the spot whether it is true. In other words, it's possible that the interrupt signal you received came from monitoring. The second is an on-site inspection. If it turns out that the cooling water has indeed been interrupted, then the cause must be found immediately. there is no need to shut it down immediately, as the unit can usually run for a while without cooling water. Of course, if you check the cause but cannot find it and the operating temperature of the unit has exceeded the standard, stop the machine in time. The second is that if the on-site inspection of the unit cooling water is normal, check the monitoring equipment to see if there is an equipment problem.
Hello, if there is a small amount of water in the fuel tank, the engine can start and run normally. At this moment, the pOwner can add fuel additives such as tank water remover, fuel treasure, etc. to help the engine burn better.
If there is too much water, you can use the sedimentation method first. First, rush out some of the water, then put some oil in the next day, then remove the spark plug and wipe it clean. then open the front engine cover and remove the spark plug and spark plug. It can be used after the engine has been exposed to sunlight for a while. If the car owner finds that a large amount of water enters the fuel tank, it is recommended to tow the car to a professional maintenance shop to clean the fuel tank, fuel pipes and fuel injectors, then replace the fuel filter.
Actually, water entering the fuel tank is not great as long asIf it is processed on time, there will be no problem. Do not add a large amount of water to act as oil when traveling, and be careful to keep the fuel tank cap tight on rainy days.