Water jet, polisher, brick cutter, toothless saw, laser knife.
Due to the fragility of rock slabs, the requirements for the deck of the bridge cutting machine are relatively high. The board should be basically flat, with no hollows and no cutting grooves, especially for cutting. Thin sheets with a thickness of less than 10mm have higher requirements for deck cutting machine table panel. Because when pressure is applied to the grooves of the deck during the cutting and cutting process of the bridge cutting machine, the pressure will act on the rock slab. Due to the fragility of the rock slab, the rock slab is therefore easy to fracture. Broken, chipped and falling corners.
Precautions when processing slate
When designing kitchen countertops, keep at least 50mm from the edge of holes or grooves on the countertop. Likewise, at least50 mm must be reserved between two adjacent openings.
Design of corners and interior openings. As usual with stone, marble and joint materials, draw an arc of at least 5mm radius at each corner to distribute pressure. Inside right angle corners can be cut directly with a water jet, but this is not recommended. Due to this internal corner design, this will increase the risk of cracks on the countertop during processing, handling, transportation and installation, thereby endangering other items in the kitchen.
For the above contents, refer to Baidu Encyclopedia - Rock Slab, Baidu Encyclopedia - Saw Blade
Stress uneven internal.
Cracking of Lamina rock slabs during waterjet cutting is caused by uneven stresses inside the slab body, mainly during the baking and baking processes. ofpressing. The process of making tiles is complex and the procedures are complex. relatively complex, if there are too many, it may result in uneven stress or dark cracks in the body of the rock slab.
Yantai Lamina Slate Stone Co., Ltd. has a registered capital of 500,000 RMB, its legal representative is Wang Qian, its business status is open, and its business scope includes the sale of furniture, stone and hardware. and electrical appliances.