Usinga siphoncan cause water to flow from low areas to high areas. There is a device called a water hammer pump, which is powered by flowing water and generates water mechanically. action The water hammer effect is a water lifting device that converts low falling water energy into high falling water energy.
The water hammer pump is an advanced water lifting device that uses flowing water as energy, produces a water hammer effect by mechanical action, and converts a low water head energy into high water head energy.
The water hammer pump mainly consists of six main parts: inlet pipe, pump body, drain valve, center valve, pressure tank and outlet pipe.
A pump that uses the energy generated during the flow of water is suddenly slowed down to increase the pressuren of part of the water up to a certain height.
This is due to the application of a water hammer pump.
A water hammer pump is a water lifting device that uses flowing water as impact power to produce a water hammer effect and lift the water from low places to high places. device that converts kinetic energy into A simple machine that converts pressure energy, ram pumps are mainly used for irrigation, agriculture and drinking water around rivers or reservoirs in mountains, hills and plains.
The biggest advantage of the water hammer pump is that it does not need to consume energy such as electricity, and the structure of the water hammer pump is simple , composed of a water inlet and outlet, a pressure tank, a pump body, a water discharge valve and a drain valve Compdaring of several pieces.
The water lifting capacity of a water hammer pump depends on various parameters such as lifting height, water inlet jetty, diameter of inlet pipes and output, efficiency, etc. The efficiency of a water hammer pump is generally divided into device efficiency and its own efficiency. The efficiency of the device refers to the pipe overrun. The effectiveness that occurs after resistance en route and loss of local resistance.
Water resources at low water levels are sufficient. It is best to have running water all year round and meet water volume requirements (water flow is 2-3 water cycles).
There is some elevation change (1.5 meters to 4 meters, preferably 4 meters) in streams, reservoir dams or artificial falls outside the floodway. 3. Domestic water or irrigation water is requiredarea in high places.
Lifespan:
The lifespan of the water hammer pump is very long and can be used for about 30 years. The maintenance cost is also very low. Build a machine room or hire a dedicated person to manage it. Simply replace the seal ring at the appropriate time and apply paint once a year. The water hammer pump has a long water flow, large water capacity and high water flow. elevator. The height can reach 30 meters or more. Of course, the higher the height, the lower the flow.
When the water lifting height is 30 meters, the 24-hour water lifting capacity of 630 machine is 70 tons and that of 420 machine is 18, 7 tons. In terms of economic benefits, besides water hammer pumps can be used because there is no electricity, it is also very economical.It is only and profitable to use water hammer pumps in areas with electricity.