The mass of 450 m3 of water is 1,000*450=450,000 kilograms, the gravitational potential energy is 450,000*10*50=22,500,000 J, 1 hour is 60 minutes, 2,250 000 000*60=1.35*10 to the 10th power J< p>The power is 1.35*10 to the 10th power/3600=3.75*10 to the 6th power W
The head of water flow is 200 tons per hour and the head of fall is 50 meters. the pressure is 2. What can I do using a hydraulic generator per hour? How many kilowatt hours of electricity are generated
The configuration of a 1 ton hot water boiler is a bit large. of 50 tonnes poses no problem, but the drop height of 50 m is too high. Regardless of the number of stories in a building, there is a relationship between circulation height and system pressure. The flow rate of the circulation pump is not large. high, so the resistance to extension is not great. Generally, 32 m is enough.If the floor is high, simply adjust the height of the water replenishment pump. However, if they are all geothermal circulation systems, you can choose this configuration.
If 50 pipes want to pump water up to the fifth floor, the height is estimated to be 17M. What size pipe pump should be used, how big the motor should be, and what size can be the flow. . Daily water consumption is 50-60 tons
The pressure of the head of 50 meters (water height) is only 2? This means that there is only 20 meters of water height! There are two possibilities: one is that the pressure gauge is broken and the other is that the pipe diameter is too small. If the water height is 50 meters, the flow rate is 0.0556 cubic meters per second, and the efficiency is estimated to be 70%, the power is about 19 kW, which can generate 19 degrees of electricity per hour.
What is the ground pressure of50 tons of water in a 30 meter high water tower?
The 50 meter hose is suitable for a flow rate of no more than 20 cubic meters. If the pipe does not have an elbow, a 20 meter pipe can be used. The pump power should be 2.2 kW. /p>
If the pipe has a larger elbow, you can use a maximum of 3kw power with a flow rate of 20 cubic meters and a lift of 30 meters, or a motor with a flow rate of 15 cubic meters and a 2.2kw elevator.
Is it water pressure or ground water tower pressure?
If the water tower pressure on the ground is F=mg. Also add the weight of the water tower itself.
To talk about water “pressure”, we generally have to refer to the “pressure” of water. What is the practical meaning of pressure?
Pressure is the pressure of a 30 meter column of water, which is approximately 0.3 Mp, or 3 kg/cm2. It is often referred to as 3kg pressure. The size of the ppressure has nothing to do with the quantity of water, but is only linked to the density of the water, the constant G and the height of the water column.